Navigation
Supported Platforms
list
Syntax
list -T target <-l depth>
Release Information
Command supported by Junos OS Release 9.1 and later.
Description
(JCS management module CLI) List devices on the JCS1200 platform. This information is useful for determining how many Routing Engines and JCS management modules are installed and which JCS management module is primary.
Options
-T target—Specify a command target. Valid targets for this command include:
- system:blade[x]—Specify a Routing Engine as the command target. Replace x with the Routing Engine slot number (1 through 12).
- system:blower[x]—Specify a JCS fan (blower) as the command target.
- system:mm[x]—Specify a JCS management module as the command target. Replace x with the primary management module number (1 or 2).
- system:power[x]—Specify a JCS power module as the command target. Replace x with the power module number (1 through 4).
- system:switch[x]—Specify a JCS switch module as the command target. Replace x with the switch number (1 or 2).
If no command target is specified, all devices on the JCS1200 platform are listed.
-l depth—(Optional) List a hierarchy of devices (starting with the device specified as the command target). Replace depth with one of the following values:
- 2 | all | a—List the full hierarchy of devices (starting at the command target level). You can enter a as an abbreviation for all.
- 1—List the command target only.
Required Privilege Level
operator
List of Sample Output
list (All)Output Fields
When you enter this command, you are provided feedback on the status of your request.
Sample Output
list (All)
system> list -l amm[1] primary
mm[2] standby
power[1]
power[2]
power[3]
power[4]
blower[1]
blower[2]
blower[3]
blower[4]
switch[1]
switch[2]
blade[1] bcgcpu1
sp
cpu[1]
blade[3] bcgcpu3
sp
cpu[1]
blade[4] bcgcpu4
sp
cpu[1]
blade[5] bcgcpu5
sp
cpu[1]
blade[6] bcgcpu6
sp
cpu[1]
mt[1]
mt[2]
tap
mux[1]
mux[2]
