Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

TechLibrary
Navigation
Table of Contents
Guide That Contains This Content
[+] Expand All
[-] Collapse All

    request chassis fabric plane

    Syntax

    request chassis fabric plane plane-number (offline | online)

    Release Information

    Command introduced in Junos OS Release 8.0.

    Command introduced in Junos OS Release 9.4 for EX Series switches.

    Command introduced in Junos OS Release 12.3 for MX2020 3D Universal Edge Routers.

    Command introduced in Junos OS Release 12.3 for MX2010 3D Universal Edge Routers.

    Description

    (M120 and MX Series routers and EX8200 switches only) Control the operation of the specified fabric plane.

    On an MX480 or MX240 series router, you can configure the active control board for redundancy mode or increased bandwidth mode. When running in increased bandwidth mode, MX series routers with Trio chips and the MPC3E will use all eight active fabric planes.

    To take both plane 0 and plane 1 offline on a MX480 and MX240 series routers with one or more MPC4E MICs installed, a X86 Media Service Blade, and/or 100G PFE, and where redundancy-mode is configured for "increased-bandwidth", Juniper recommends taking plane 1 offline before plane 0. Likewise, when the router is configured for increased-bandwidth mode, taking fabric planes 0, 2, 4, and 6 offline can cause the chassis to run in a reduced fabric bandwidth mode. Plane 7 may remain in a "spare" state (as seen in the "show chassis fabric summary" command output) until plane 3 is taken offline and then brought back up.

    Options

    offline
    		—

    Take the fabric plane offline. Use the request chassis fabric plane plane-number offline command to clear a FAULT state on a fabric plane. To bring the fabric plane back online, use the request chassis fabric plane plane-number online command.

    online
    		—

    Bring the fabric plane online.

    plane plane-number
    		—

    Fabric plane number.

    • For the M120 router, replace plane-number with a value from 0 through 3.
    • For the MX480 and MX240 routers, replace plane-number with a value from 0 through 7.
    • For the MX2020 and MX2010 routers, replace plane-number with a value from 0 through 7.
    • For the MX960 router, replace plane-number with a value from 0 through 5.
    • For the EX8208 switch, replace plane-number with a value from 0 through 11.
    • For the EX8216 switch, replace plane-number with a value from 0 through 7.

    Required Privilege Level

    maintenance

     

    Related Documentation

     

    List of Sample Output

    request chassis fabric plane 0 online
    request chassis fabric plane 0 offline
    request chassis fabric plane 0 online (EX8200 switch)
    request chassis fabric plane (MX2020 Router)
    request chassis fabric plane (MX2010 Router)

    Output Fields

    When you enter this command, you are provided feedback on the status of your request.

    Sample Output

    request chassis fabric plane 0 online

    user@host> request chassis fabric plane 0 online
    Online initiated, use “show chassis fabric plane” to verify

    request chassis fabric plane 0 offline

    user@host> request chassis fabric plane 0 offline
    Offline initiated, use “show chassis fabric plane” to verify

    request chassis fabric plane 0 online (EX8200 switch)

    user@host> request chassis fabric plane 0 online
    Plane 0 is already active

    request chassis fabric plane (MX2020 Router)

    user@host> request chassis fabric plane 2 online
    Plane 2 is already active

    request chassis fabric plane (MX2010 Router)

    user@host> request chassis fabric plane 4 online
    Plane 4 is already active

    Published: 2014-04-23

    Previous Page Next Page