Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

TechLibrary
Navigation

request chassis pic

List of Syntax

Syntax
Syntax (ACX4000 Series Routers)
Syntax (TX Matrix and TX Matrix Plus Routers)

Syntax

request chassis pic (offline | online) fpc-slot slot-number pic-slot slot-number

Syntax (ACX4000 Series Routers)

request chassis pic (offline | online) fpc-slot slot-number pic-slot slot-number

Syntax (TX Matrix and TX Matrix Plus Routers)

request chassis pic (offline | online) fpc-slot slot-number pic-slot slot-number <lcc number>

Release Information

Command introduced before Junos OS Release 7.4.

Command introduced in Junos OS Release 9.0 for EX Series switches.

Command introduced in Junos OS Release 12.3 for ACX4000 Routers.

Command introduced in Junos OS Release 13.2 for the QFX Series.

Description

Control the operation of the PIC.

Note: The request chassis pic (offline | online) fpc-slot slot number pic-slot slot-number command is not supported for built-in PICs on MX Series routers.

To view a list of built-in PICs on the router or switch chassis, use the show chassis hardware command.

Note: T1600 routers and TX Matrix Plus routers with 100-Gigabit Ethernet PICs require two adjacent PIC slots, 0 and 1, for each PIC. Therefore, only online and offline command options to PIC slot 0 are allowed. Use of the online and offline command options for PIC slot 1 with the described router and PIC combination is not allowed.

Note: In T Series routers, when the PIC state is set from offline to online or vice-versa before the processing is complete for the previous command, you are provided feedback on the status of your request. The following sample messages are displayed if you try to set a PIC offline or online:

user@switch> request chassis pic fpc-slot 1 pic-slot 0 online
fpc 1 pic 0 online initiated, use "show chassis fpc pic-status" to verify
user@switch> request chassis pic fpc-slot 1 pic-slot 0 online 
FPC 1 PIC 0 already transitioning to online

When the same PIC is set to a different state while the transition is in progress, you are provided feedback on the status of your request.

user@switch> request chassis pic fpc-slot 1 pic-slot 0 offline
FPC 1, PIC 0 already transitioning to online.  Please retry later.

Options

offline
—

Take the PIC offline.

online
—

Bring the PIC online.

fpc-slot slot-number
—

Flexible PIC Concentrator (FPC) slot number. Replace slot-number with a value appropriate for your router or switch:

  • ACX4000 routers—1 or 2.
  • EX Series switches:
    • EX3200 switches and EX4200 standalone switches—0.
    • EX4200 switches in a Virtual Chassis configuration—0 through 9 (switch’s member ID).
    • EX8208 switches—0 through 7 (line card).
    • EX8216 switches—0 through 15 (line card).
  • M5, M7i, M10, and M10i routers—0 or 1.
  • M20 routers—0 through 3.
  • M40 and M40e routers—0 through 7.
  • M120 routers—0 through 5.
  • M160 routers—0 through 7.
  • M320 routers—0 through 7.
  • MX 5, MX10, and MX40 routers—0 or 1.
  • MX80 routers—0 or 1.
  • MX240 routers—0 through 2
  • MX480 routers—0 through 5
  • MX2020 routers—0 through 19.
  • MX2010 routers—0 through 9.
  • MX960 routers—0 through 11.
  • PTX5000 routers—0 or 1.
  • T Series routers—0 through 7.
  • TX Matrix and TX Matrix Plus routers only—On a TX Matrix router, if you specify the number of the T640 router by using the lcc number option (the recommended method), replace slot-number with a value from 0 through 7. Otherwise, replace slot-number with a value from 0 through 31.

    Likewise, on a TX Matrix Plus router, if you specify the number of the T1600 or T4000 router by using the lcc number option (the recommended method), replace slot-number with a value from 0 through 7. Otherwise, for the FPC slot number, replace slot-number with a value from 0 through 31. On a TX Matrix Plus router with 3D SIBs to assign the FPC slot number, replace slot-number with a value from 0 through 63. For example, the following commands have the same result:

    user@host> request chassis pic fpc-slot 1 lcc 1 pic-slot 0 offlineuser@host> request chassis pic fpc-slot 9 pic-slot 0 offline
  • QFX5100 standalone switches—0.
pic-slot slot-number
—

PIC slot number.

  • EX3200 and EX4200 switches—0 for built-in network interfaces and 1 for interfaces on uplink modules.
  • EX8208 and EX8216 switches—0.
  • M Series routers—0, 1, 2, or 3
  • MX960 router—slot-number corresponds to the slot number of the Packet Forwarding Engine.
  • PTX5000 routers—0 or 1.
  • T320 router—0 or 1.
  • T640 router—0, 1, 2, or 3.
  • T1600 router —0, 1, 2, or 3.
  • T4000 router—0, 1, 2, or 3.
  • QFX5100 standalone switches—0, 1, or 2. PIC 0 is used for all interfaces that are not configured on expansion modules, and PIC 1 and PIC 2 are used for interfaces configured on expansion modules.
lcc number
—

(TX Matrix router and TX Matrix Plus router only) (Optional) Line-card chassis number.

Replace number with the following values depending on the LCC configuration:

  • 0 through 3, when T640 routers are connected to a TX Matrix router in a routing matrix.
  • 0 through 3, when T1600 routers are connected to a TX Matrix Plus router in a routing matrix.
  • 0 through 7, when T1600 routers are connected to a TX Matrix Plus router with 3D SIBs in a routing matrix.
  • 0, 2, 4, or 6, when T4000 routers are connected to a TX Matrix Plus router with 3D SIBs in a routing matrix.

Required Privilege Level

maintenance

 

Related Documentation

 

List of Sample Output

request chassis pic

Output Fields

When you enter this command, you are provided feedback on the status of your request.

Sample Output

request chassis pic

user@host> request chassis pic pic-slot 0 online fpc-slot 0
FPC 0, PIC 0 is already online

Published: 2014-07-23

Previous Page Next Page