request interface (revert | switchover) (Adaptive Services)
Syntax
Release Information
Command introduced before Junos OS Release 7.4.
Support for rlsq interfaces added in Junos OS Release 7.6.
Description
(M Series and T Series routers only) Manually revert to the primary adaptive services interface or link services IQ interface, or to switch from the primary to the secondary interface.
 | Note: All rlsq switchover or revert operations are allowed from the rlsqnumber level only and not for individual channelized interfaces (rlsqnumber:unit). |
On an aggregated Ethernet interface with link protection enabled, use the request interface (revert | switchover) (Aggregated Ethernet Link Protection) operational command to manually revert egress traffic from the designated backup link to the designated primary link, or to manually switch egress traffic from the primary link to the backup link. For information about this command, see request interface (revert | switchover) (Aggregated Ethernet Link Protection).
Options
(revert | switchover) | — | The revert keyword restores active processing to the primary adaptive services (sp) or link services IQ (lsq) interface. The switchover keyword transfers active processing to the secondary (backup) interface. |
rspnumber | — | Redundant adaptive services interface name. |
rlsqnumber | — | Redundant link services IQ interface name. |
Required Privilege Level
view
List of Sample Output
request interface revertrequest interface switchover
Output Fields
When you enter this command, you are provided feedback on the status of your request.
Sample Output
request interface revert
user@host> request interface revert rlsq0request succeeded
request interface switchover
user@host> request interface switchover rlsq0error: rlsq0: already on secondary
