request virtual-chassis member-id set
Syntax
Release Information
Command introduced in Junos OS Release 11.2.
Command introduced in Junos OS Release 13.2R2 for EX Series switches.
Description
Assign (set) a member ID to a router or switch that you want to add as a member of a Virtual Chassis configuration.
 | Note: Issuing the command to assign a member ID causes the device to reboot, and requires you to confirm that you want to proceed with this operation. If you do not confirm the operation, the software cancels the command. After the reboot all MPCs remain powered off until the Virtual Chassis port connection is configured. |
Options
member member-id | — | Numeric value that identifies a member router or switch in a Virtual Chassis configuration. When you assign a member ID to a router or switch, assign the same member ID defined for this device in the preprovisioned configuration. Replace member-id with the value 0 or 1. |
Required Privilege Level
system-control
List of Sample Output
request virtual-chassis member-id setSample Output
request virtual-chassis member-id set
user@host> request virtual-chassis member-id
set member 0This command will enable virtual-chassis mode and reboot the system.
Continue? [yes,no] (no)
