Navigation
show system processes providers
Syntax
show system processes providers
Release Information
Command introduced in Junos OS Release 8.5.
Description
Display information about software processes that are running on the router. The output is similar to that of the show system processes extensive command, but this command displays only provider processes (that is, only external processes). Also, this command’s output has an extra column labeled PROVIDER to display the provider prefix.
Required Privilege Level
view
List of Sample Output
show system processes providersOutput Fields
For a description of the output fields, see the output fields table for the show system processes command in the Junos System Basics and Services Command Reference. This table explains all the fields except for PROVIDER which is for the string that is the provider prefix for the Junos application running the process.
Sample Output
show system processes providers
user@host> show system processes providerslast pid: 7014; load averages: 0.19, 0.09, 0.05 up 0+00:57:29 12:54:45
54 processes: 1 running, 53 sleeping
Mem: 101M Active, 105M Inact, 31M Wired, 132M Cache, 69M Buf, 369M Free
Swap: 1536M Total, 1536M Free
PID USERNAME PROVIDER PRI NICE SIZE RES STATE TIME WCPU COMMAND
7001 root jnx 96 0 3240K 2700K select 0:00 0.00% jnx-exampled
