Navigation
Related Documentation
- ACX, EX, J, M, MX, T Series
- test interface t1-bert-stop
- test interface e1-bert-start
- test interface e1-bert-stop
test interface t1-bert-start
Syntax
test interface t1-bert-start interface-name
Release Information
Command introduced before Junos OS Release 7.4.
Description
Start a bit error rate test (BERT) on a T1 interface.
Options
interface-name | — | Interface name: t1-fpc/pic/port or ct1-fpc/pic/port <:channel>. |
Additional Information
Before starting a BERT, you must disable the interface. To do so, include the disable statement at the [edit interfaces interface-name] hierarchy level. You can run a BERT on only one interface per PIC at a time.
 | Note: Due to hardware limitations of the framer used in IQ PICs, BERT is not supported in unframed mode on the interface and may return false positive results. BERT in unframed mode is supported on Enhanced IQ (IQE) PICs. |
Required Privilege Level
view
Related Documentation
- ACX, EX, J, M, MX, T Series
- test interface t1-bert-stop
- test interface e1-bert-start
- test interface e1-bert-stop
List of Sample Output
test interface t1-bert-startOutput Fields
To display the results of the BERT, use the show interfaces extensive command.
Sample Output
test interface t1-bert-start
user@host> test interface t1-bert-start t1-1/0/0Published: 2013-07-24
Related Documentation
- ACX, EX, J, M, MX, T Series
- test interface t1-bert-stop
- test interface e1-bert-start
- test interface e1-bert-stop
