Supported Platforms
Related Documentation
accept-data
Syntax
Hierarchy Level
Release Information
Statement introduced before Junos OS Release 7.4.
Statement introduced in Junos OS 11.3 for the QFX Series.
Description
In a Virtual Router Redundancy Protocol (VRRP) configuration, determine whether or not a router that is acting as the master router accepts all packets destined for the virtual IP address.
- accept-data—Enable the master router to accept all packets destined for the virtual IP address.
- no-accept-data—Prevent the master router from accepting packets other than the ARP packets destined for the virtual IP address.
Default
If the router acting as the master router is the IP address owner or has its priority set to 255, the master router, by default, responds to all packets sent to the virtual IP address. However, if the router acting as the master router does not own the IP address or has its priority set to a value less than 255, the master router responds only to ARP requests.
 | Note:
|
Required Privilege Level
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
