Supported Platforms
Related Documentation
- EX, M, T Series
- Configuring VRRP Authentication (IPv4 Only)
- EX, M, MX, SRX, T Series, QFabric System, QFX Series standalone switches
- authentication-type
- EX, M, MX Series
- version-3
- QFabric System, QFX Series standalone switches
- Configuring VRRP Authentication (IPv4 Only)
authentication-key
Syntax
Hierarchy Level
Release Information
Statement introduced before Junos OS Release 7.4.
Statement introduced in Junos OS 11.3 for the QFX Series.
Description
Configure a Virtual Router Redundancy Protocol (VRRP) IPv4 authentication key. You also must specify a VRRP authentication scheme by including the authentication-type statement.
All routers in the VRRP group must use the same authentication scheme and password.
![]() | Note: When VRRPv3 is enabled, the authentication-type and authentication-key statements cannot be configured for any VRRP groups. |
Options
key—Authentication password. For simple authentication, it can be 1 through 8 characters long. For Message Digest 5 (MD5) authentication, it can be 1 through 16 characters long. If you include spaces, enclose all characters in quotation marks (“ ”).
Required Privilege Level
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
Related Documentation
- EX, M, T Series
- Configuring VRRP Authentication (IPv4 Only)
- EX, M, MX, SRX, T Series, QFabric System, QFX Series standalone switches
- authentication-type
- EX, M, MX Series
- version-3
- QFabric System, QFX Series standalone switches
- Configuring VRRP Authentication (IPv4 Only)
Published: 2014-07-23
Supported Platforms
Related Documentation
- EX, M, T Series
- Configuring VRRP Authentication (IPv4 Only)
- EX, M, MX, SRX, T Series, QFabric System, QFX Series standalone switches
- authentication-type
- EX, M, MX Series
- version-3
- QFabric System, QFX Series standalone switches
- Configuring VRRP Authentication (IPv4 Only)