Navigation
Supported Platforms
Related Documentation
- ACX, M, MX, PTX, T Series
- Configuring Link Protection on Interfaces Used by LSPs
class-of-service (Protocols RSVP)
Syntax
class-of-service cos-value;
Hierarchy Level
[edit logical-systems logical-system-name protocols rsvp interface interface-name link-protection],[edit logical-systems logical-system-name protocols rsvp interface interface-name link-protection bypass bypass-name],[edit protocols rsvp interface interface-name link-protection],[edit protocols rsvp interface interface-name link-protection bypass bypass-name]
Release Information
Statement introduced before Junos OS Release 7.4.
Description
Class-of-service (CoS) value given to all packets in the bypass LSP. You can specify a single CoS value for all the bypass LSPs traversing an interface. You can also configure CoS values for specific bypass LSPs traversing an interface.
The CoS value might affect the scheduling or queuing algorithm of traffic traveling along an LSP.
Options
cos-value—CoS value. A higher value typically corresponds to a higher level of service.
Range: 0 through 7
Default: If you do not specify a CoS value, the IP precedence bits from the packet’s IP header are used as the packet’s CoS value.
Required Privilege Level
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
Related Documentation
- ACX, M, MX, PTX, T Series
- Configuring Link Protection on Interfaces Used by LSPs
Published: 2013-07-31
Supported Platforms
Related Documentation
- ACX, M, MX, PTX, T Series
- Configuring Link Protection on Interfaces Used by LSPs
