Navigation
Related Documentation
- J, SRX Series
- Example: Configuring IS-IS for CLNS
- J, MX, SRX Series
- Example: Configuring Static Routes for CLNS
- Example: Configuring BGP and CLNS
clns-routing
Syntax
clns-routing;
Hierarchy Level
Release Information
Statement introduced before Junos OS Release 7.4.
Statement introduced in Junos OS Release 11.2 for MX Series routers.
Description
Enable IS-IS to exchange Connectionless Network Service (CLNS) routes. CLNS is a Layer 3 protocol, similar to IPv4. CLNS uses network service access points (NSAPs) to address end systems and intermediate systems.
Required Privilege Level
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
Related Documentation
- J, SRX Series
- Example: Configuring IS-IS for CLNS
- J, MX, SRX Series
- Example: Configuring Static Routes for CLNS
- Example: Configuring BGP and CLNS
Published: 2013-07-22
Related Documentation
- J, SRX Series
- Example: Configuring IS-IS for CLNS
- J, MX, SRX Series
- Example: Configuring Static Routes for CLNS
- Example: Configuring BGP and CLNS