Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

TechLibrary
Navigation

compatibility-mode

Syntax

compatibility-mode (adtran | digital-link | kentrox | larscom | verilink) <subrate value>;

Hierarchy Level

[edit interfaces interface-name e3-options],[edit interfaces interface-name t3-options]

Release Information

Statement introduced before Junos OS Release 7.4.

Description

Configure the E3 or T3 interface to be compatible with the channel service unit (CSU) at the remote end of the line.

Note: The compatibility-mode statement at the [edit interfaces interface-name e3-options] hierarchy level is not valid for IQE PICs.

Default

If you omit this option, the full E3 or T3 rate is used.

Options

adtran—For T3 IQ interfaces only, configure compatibility with Adtran CSUs.

digital-link—Configure compatibility with Digital Link CSUs. If you include this option on an E3 interface, you must also disable payload scrambling.

kentrox—Configure compatibility with Kentrox CSUs. Kentrox subrate is valid for E3 IQ and T3 IQ interfaces only.

larscom—For T3 and T3 IQ interfaces only, configure compatibility with Larscom CSUs.

verilink—For T3 IQ and T3 IQE interfaces only, configure compatibility with Verilink CSUs.

Note: Verilink configuration is not functional if an IQ interface is paired with an IQE interface.

subrate value—Subrate of the E3 or T3 line.

Range: For Kentrox CSUs on E3 IQ interfaces and T3 IQ interfaces the subrate value must match the value configured on the CSU. Each increment of the subrate value corresponds to a rate increment of about 0.5 Mbps.

Required Privilege Level

interface—To view this statement in the configuration.

interface-control—To add this statement to the configuration.

 

Related Documentation

 

Published: 2013-08-01

Previous Page Next Page