Navigation
Supported Platforms
Related Documentation
- ACX, M, MX, T Series
- connectivity-fault-management
- MX, T Series
- Configuring MAC Flush Message Processing in CET Mode
- MX Series
- Example: Configuring an Action Profile Based on Connection Protection TLVs
connection-protection-tlv
Syntax
connection-protection-tlv <using-protection-path | using-working-path>
Hierarchy Level
[edit protocols oam ethernet connectivity-fault-management]
Description
This statement determines which path the connection protection TLV will use. An action profile using “connection-protection-tlv using-protection-path” should apply the statement for a CFM sessions that is monitoring the working path and an action profile using “connection-protection-tlv using-working-path” should apply the command for a CFM session that is monitoring the protection path. Using them in the opposite way could mean drop of service traffic.
Required Privilege Level
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
Related Documentation
- ACX, M, MX, T Series
- connectivity-fault-management
- MX, T Series
- Configuring MAC Flush Message Processing in CET Mode
- MX Series
- Example: Configuring an Action Profile Based on Connection Protection TLVs
Published: 2013-07-24
Supported Platforms
Related Documentation
- ACX, M, MX, T Series
- connectivity-fault-management
- MX, T Series
- Configuring MAC Flush Message Processing in CET Mode
- MX Series
- Example: Configuring an Action Profile Based on Connection Protection TLVs
