Supported Platforms
Related Documentation
- EX, J, M, MX, PTX, T Series
- Configuring RPM Probes
- M, MX, PTX, T Series
- Configuring BGP Neighbor Discovery Through RPM
destination-port
Syntax
Hierarchy Level
Release Information
Statement introduced before Junos OS Release 7.4.
Statement introduced in Junos OS Release 9.3 for EX Series switches.
Statement introduced in Junos OS Release 13.2 for PTX Series Packet Transport Routers.
Description
Specify the User Datagram Protocol (UDP) or Transmission Control Protocol (TCP) port to which a probe is sent. This statement is used only for TCP or UDP probe types.
The value for the destination-port can be only 7 when you configure along with hardware timestamping. A constraint check prevents you for configuring any other value for the destination port in this case.
This constraint does not apply when you are using one-way hardware timestamping along with destination-port and either probe-type udp-ping or probe-type udp-ping-timestamp.
Options
port—The port number can be 7 or from 49,160 to 65,535.
Required Privilege Level
system—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
Related Documentation
- EX, J, M, MX, PTX, T Series
- Configuring RPM Probes
- M, MX, PTX, T Series
- Configuring BGP Neighbor Discovery Through RPM
Published: 2014-04-24
Supported Platforms
Related Documentation
- EX, J, M, MX, PTX, T Series
- Configuring RPM Probes
- M, MX, PTX, T Series
- Configuring BGP Neighbor Discovery Through RPM
