Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation

examine-fip

Syntax

examine-fip {examine-vn2vn {beacon-period milliseconds;}fc-map fc-map-value;no-fip-snooping-scaling;}

Hierarchy Level

[edit ethernet-switching-options secure-access-port vlan (all | vlan-name)]

Release Information

Statement introduced in Junos OS Release 10.4 for EX Series switches.

Statement introduced in Junos OS Release 11.1 for the QFX Series.

Statement examine-vn2vn introduced in Junos OS Release 12.2 for the QFX Series.

Statement no-fip-snooping-scaling introduced in Junos OS Release 13.2X52-D10 for the QFX Series.

Description

Note: This statement supports the original CLI. If your switch runs the Enhanced Layer 2 Software (ELS) CLI, see examine-vn2vf for VN_Port to VF_Port (VN2VF_Port) FIP snooping, and see examine-vn2vn for VN_Port to VN_Port (VN2VN_Port) FIP snooping. For ELS details, see Getting Started with Enhanced Layer 2 Software.

Enable FIP snooping on a specified VLAN. Ensure that the VLAN is a dedicated FCoE VLAN that transports only FCoE traffic.

(QFX Series only) Enable VN2VN_Port FIP snooping on the specified VLAN. The VLAN must be a dedicated FCoE VLAN that transports only VN2VN_Port traffic. One FCoE VLAN cannot support both VN2VF_Port FIP snooping and VN2VN_Port FIP snooping. Configure separate, dedicated FCoE VLANs for VN2VN_Port FIP snooping and VN2VN_Port FIP snooping.

The remaining statements are explained separately.

Required Privilege Level

routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.

Published: 2014-07-23