Navigation
Supported Platforms
Related Documentation
- ACX, M, PTX, T Series
- Configuring the Ingress and Egress Router Addresses for LSPs
from (Protocols MPLS)
Syntax
from address;
Hierarchy Level
[edit logical-systems logical-system-name protocols mpls label-switched-path lsp-name],[edit protocols mpls label-switched-path lsp-name]
Release Information
Statement introduced before Junos OS Release 7.4.
Description
Specify the source address to use for the LSP.
The address you specify does not affect the outgoing interface used by the LSP.
Default
If you do not include this statement, the software automatically selects the loopback interface as the address.
Options
address—IP address.
Required Privilege Level
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
Related Documentation
- ACX, M, PTX, T Series
- Configuring the Ingress and Egress Router Addresses for LSPs
Published: 2013-07-31
Supported Platforms
Related Documentation
- ACX, M, PTX, T Series
- Configuring the Ingress and Egress Router Addresses for LSPs
