Related Documentation
- EX, M, MX, SRX, T Series
- group-limit
- J, M, MX, SRX, T Series
- Configuring the Number of MLD Multicast Group Joins on Logical Interfaces
- M, MX, T Series
- log-interval
group-threshold (Protocols MLD Interface)
Syntax
Hierarchy Level
Release Information
Statement introduced in Junos OS Release 12.2.
Description
Specify the threshold at which a warning message is logged for the multicast groups received on a logical interface. The threshold is a percentage of the maximum number of multicast groups allowed on a logical interface.
For example, if you configure a maximum number of 1,000 incoming multicast groups, and you configure a threshold value of 90 percent, warning messages are logged in the system log when the interface receives 900 groups.
To confirm the configured group threshold on the interface, use the show mld interface command.
Default
By default, there is no configured threshold value.
Options
value—Percentage of the maximum number of multicast groups allowed on the interface that starts triggering the warning. You configure a percentage of the group-limit value that starts triggering the warnings. You must explicitly configure the group-limit to configure a threshold value.
Range: 1 through 100
Required Privilege Level
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
Related Documentation
- EX, M, MX, SRX, T Series
- group-limit
- J, M, MX, SRX, T Series
- Configuring the Number of MLD Multicast Group Joins on Logical Interfaces
- M, MX, T Series
- log-interval
Published: 2013-08-28
Related Documentation
- EX, M, MX, SRX, T Series
- group-limit
- J, M, MX, SRX, T Series
- Configuring the Number of MLD Multicast Group Joins on Logical Interfaces
- M, MX, T Series
- log-interval