Navigation
Supported Platforms
Related Documentation
- ACX, M, PTX, T Series
- Adding LSP-Related Routes to the inet.3 or inet6.3 Routing Table
install (Protocols MPLS)
Syntax
install {destination-prefix <active>;}
Hierarchy Level
[edit logical-systems logical-system-name protocols mpls label-switched-path lsp-name],[edit logical-systems logical-system-name protocols mpls static-label-switched-path lsp-name ingress],[edit protocols mpls label-switched-path lsp-name],[edit protocols mpls static-label-switched-path lsp-name ingress]
Release Information
Statement introduced before Junos OS Release 7.4.
Description
Associate one or more prefixes with an LSP. When the LSP is up, all the prefixes are installed as entries into the inet.3 or inet6.3 routing table.
Options
active—(Optional) Install the route into the inet.0 or inet6.0 routing table. This allows you to issue a ping or traceroute command on this address.
destination-prefix—IPv4 or IPv6 address to associate with the LSP.
Required Privilege Level
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
Related Documentation
- ACX, M, PTX, T Series
- Adding LSP-Related Routes to the inet.3 or inet6.3 Routing Table
Published: 2013-07-31
Supported Platforms
Related Documentation
- ACX, M, PTX, T Series
- Adding LSP-Related Routes to the inet.3 or inet6.3 Routing Table
