Supported Platforms
Related Documentation
- ACX, M, MX, PTX, T Series, QFX Series standalone switches
- Example: Configuring IS-IS IPv4 and IPv6 Unicast Topologies
ipv6-unicast
Syntax
Hierarchy Level
Release Information
Statement introduced before Junos OS Release 7.4.
Statement introduced in Junos OS Release 9.0 for EX Series switches.
Description
Configure alternate IPv6 unicast topologies.
This statement causes IS-IS to calculate an alternate IPv6 unicast topology, in addition to the normal IPv4 unicast topology, and add the corresponding routes to inet6.0.
![]() | Note: The IS-IS interface metrics for the IPv4 topology can be configured independently of the IPv6 metrics. You can also selectively disable interfaces from participating in the IPv6 topology while continuing to participate in the IPv4 topology. This lets you exercise control over the paths that unicast data takes through a network. |
Default
IPv6 unicast topologies are disabled.
Required Privilege Level
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
Related Documentation
- ACX, M, MX, PTX, T Series, QFX Series standalone switches
- Example: Configuring IS-IS IPv4 and IPv6 Unicast Topologies
Published: 2014-07-23
Supported Platforms
Related Documentation
- ACX, M, MX, PTX, T Series, QFX Series standalone switches
- Example: Configuring IS-IS IPv4 and IPv6 Unicast Topologies