Navigation
Supported Platforms
Related Documentation
- J, M, MX, T Series
- Configuring the LCP Configure-Request Maximum Sent
- J, M, MX, SRX, T Series
- ppp-options
lcp-max-conf-req
Syntax
lcp-max-conf-req number
Hierarchy Level
[edit interfaces so-fpc/pic/port unit number ppp-options]
Release Information
Statement introduced in Junos OS Release 9.6.
Description
Set the maximum number of LCP Configure-Requests to be sent, after which the router goes to LCP down state.
Options
number | — | From 0 to 65,535, where 0 means send infinite LCP Configure-Requests, and any other value specifies the maximum number LCP Configure-Requests to send and then stop sending. |
Default | — | 254 |
Required Privilege Level
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
Related Documentation
- J, M, MX, T Series
- Configuring the LCP Configure-Request Maximum Sent
- J, M, MX, SRX, T Series
- ppp-options
Published: 2013-08-01
Supported Platforms
Related Documentation
- J, M, MX, T Series
- Configuring the LCP Configure-Request Maximum Sent
- J, M, MX, SRX, T Series
- ppp-options
