Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

TechLibrary
Navigation

leaveall-timer (MVRP)

Syntax

leaveall-timer interval;

Hierarchy Level

  • For platforms with ELS:
    [edit protocols mvrp],[edit protocols mvrp interface interface-name]
  • For platforms without ELS:
    [edit protocols mvrp interface (all | interface-name)]

Release Information

Statement introduced in Junos OS Release 10.0 for EX Series switches.

Hierarchy level [edit protocols mvrp] introduced in Junos OS Release 13.2X50-D10 (ELS). (See Getting Started with Enhanced Layer 2 Software for information about ELS.)

Description

For Multiple VLAN Registration Protocol (MVRP), configure the interval at which the LeaveAll state operates on the interface.

Maintain default timer settings unless there is a compelling reason to change the settings. Modifying timers to inappropriate values might cause an imbalance in the operation of MVRP. However, if you choose to change the default values, keep in mind that on an EX Series switch that uses Junos OS with support for ELS, if the timer value set on an interface level is different from the value set on a switch level, then the value on the interface level takes precedence.

Options

interval—Number of seconds or milliseconds between the sending of Leave All messages.

Default: 10 seconds, or 10,000 milliseconds

Required Privilege Level

routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.

 

Related Documentation

 

Published: 2014-04-23

Previous Page Next Page