Supported Platforms
link-speed
Syntax
Hierarchy Level
Release Information
Command introduced in Junos OS Release 11.1 for the QFX Series.
Description
For aggregated Ethernet interfaces only, set the required link speed.
Options
speed—For aggregated Ethernet links, you can specify the speed in bits per second either as a complete decimal number or as a decimal number followed by the abbreviation k (1000), m (1,000,000), or g (1,000,000,000).
On QFX5100 standalone switches, you can configure mixed as the link speed. The mixed option allows you to configure mixed rate aggregated Ethernet bundles on a QFX5100 standalone switch with link speeds of 40G and 10G only. Load balancing will not work if you configure link speeds that are not supported.
Aggregated Ethernet links on the QFX Series can have one of the following speed values:
- 100g—Links are 100 Gbps.
- 100m—Links are 100 Mbps.
- 10g—Links are 10 Gbps.
- 1g—Links are 1 Gbps.
- 40g—Links are 40 Gbps.
- 50g—Links are 50 Gbps.
- 80g—Links are 80 Gbps.
- 8g—Links are 8 Gbps.
- 0c192—Links are OC-192.
- mixed—Links are 10 Gbps and 40Gbps.
Required Privilege Level
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
