Supported Platforms
Related Documentation
- ACX, M, MX, PTX, T Series
- Configuring Link Protection on Interfaces Used by LSPs
max-bypasses
Syntax
Hierarchy Level
Release Information
Statement introduced before Junos OS Release 7.4.
Range modified in Junos OS Release 9.3.
Description
Specify the maximum number of dynamic bypass LSPs permitted for protecting this interface. When this option is configured, multiple bypasses for link protection are enabled. Call admission control (CAC) is also enabled. The limit on bypasses configured applies only to dynamically generated bypass LSPs. By default, this option is disabled and only one dynamic bypass LSP is enabled for each interface. If you configure max-bypasses, you must also configure the bandwidth statement.
Options
number—Configure the maximum number of bypass LSPs. If you configure a value of 0, no dynamic bypass LSPs are allowed to be established for the interface. Only static bypass LSPs can be configured.
Range: 0 through 99
Default: 1
Required Privilege Level
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
Related Documentation
- ACX, M, MX, PTX, T Series
- Configuring Link Protection on Interfaces Used by LSPs
Published: 2013-07-31
Supported Platforms
Related Documentation
- ACX, M, MX, PTX, T Series
- Configuring Link Protection on Interfaces Used by LSPs
