Related Documentation
- M, MX Series
- Limiting the Maximum Number of PPPoE Sessions on the Underlying Interface
- PPPoE Maximum Session Limit Overview
- Guidelines for Using PPPoE Maximum Session Limit from RADIUS
- Juniper Networks VSAs Supported by the AAA Service Framework
- Additional Information
- For information about configuring dynamic PPPoE subscriber interfaces, see the Junos OS Subscriber Management and Services Library
- For information about configuring static PPPoE interfaces, see the Ethernet Interfaces
max-sessions-vsa-ignore (Static and Dynamic Subscribers)
Syntax
Hierarchy Level
Release Information
Statement introduced in Junos OS Release 11.4.
Description
Configure the router to ignore (clear) the value returned by RADIUS in the Max-Clients-Per-Interface Juniper Networks vendor-specific attribute (VSA) [26-143], and restore the PPPoE maximum session value on the underlying interface to the value configured in the CLI with the max-sessions statement. The PPPoE maximum session value specifies the maximum number of concurrent static or dynamic PPPoE logical interfaces (sessions) that the router can activate on the PPPoE underlying interface, or the maximum number of active static or dynamic PPPoE sessions that the router can establish with a particular service entry in a PPPoE service name table.
Default
If you do not include the max-sessions-vsa-ignore statement, the maximum session value returned by RADIUS in the Max-Clients-Per-Interface VSA takes precedence over the PPPoE maximum session value configured with the max-sessions statement.
Required Privilege Level
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
Related Documentation
- M, MX Series
- Limiting the Maximum Number of PPPoE Sessions on the Underlying Interface
- PPPoE Maximum Session Limit Overview
- Guidelines for Using PPPoE Maximum Session Limit from RADIUS
- Juniper Networks VSAs Supported by the AAA Service Framework
- Additional Information
- For information about configuring dynamic PPPoE subscriber interfaces, see the Junos OS Subscriber Management and Services Library
- For information about configuring static PPPoE interfaces, see the Ethernet Interfaces
Published: 2013-08-01
Related Documentation
- M, MX Series
- Limiting the Maximum Number of PPPoE Sessions on the Underlying Interface
- PPPoE Maximum Session Limit Overview
- Guidelines for Using PPPoE Maximum Session Limit from RADIUS
- Juniper Networks VSAs Supported by the AAA Service Framework
- Additional Information
- For information about configuring dynamic PPPoE subscriber interfaces, see the Junos OS Subscriber Management and Services Library
- For information about configuring static PPPoE interfaces, see the Ethernet Interfaces