Supported Platforms
Related Documentation
no-fcoe-trusted
Syntax
Hierarchy Level
Original CLI
ELS CLI for Platforms that Support FCoE
 | Note: The no-fcoe-trusted configuration statement is in a different hierarchy on the original CLI than on the Enhanced Layer 2 Software (ELS) CLI. |
Release Information
Statement introduced in Junos OS Release 10.4 for EX Series switches.
Statement introduced in Junos OS Release 11.1 for the QFX Series.
Statement introduced for the ELS CLI in Junos OS Release 13.2 for the QFX Series.
Description
Configure the specified 10-Gigabit Ethernet interface not to trust Fibre Channel over Ethernet (FCoE) traffic. If an interface is directly connected to an FCoE device, the interface should not be configured as an FCoE trusted interface. If an interface that you want to connect to an FCoE device has been configured as an FCoE trusted interface, use the no-fcoe-trusted statement to convert the interface to an untrusted interface. Untrusted interfaces can perform FIP snooping to provide access security for FCoE traffic.
However, if an interface is connected to another switch such as an FCoE forwarder (FCF) or a transit switch, you can configure the interface as trusted so that the interface forwards FCoE traffic from the switch to the FCoE devices without installing FIP snooping filters.
Required Privilege Level
routing—To view this statement in the
configuration.
routing-control—To add this statement
to the configuration.
