Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

TechLibrary
Navigation

passive (Protocols BGP)

Syntax

passive;

Hierarchy Level

[edit logical-systems logical-system-name protocols bgp],[edit logical-systems logical-system-name protocols bgp group group-name],[edit logical-systems logical-system-name protocols bgp group group-name neighbor address],[edit logical-systems logical-system-name routing-instances routing-instance-name protocols bgp],[edit logical-systems logical-system-name routing-instances routing-instance-name protocols bgp group group-name],[edit logical-systems logical-system-name routing-instances routing-instance-name protocols bgp group group-name neighbor address],[edit protocols bgp],[edit protocols bgp group group-name],[edit protocols bgp group group-name neighbor address],[edit routing-instances routing-instance-name protocols bgp],[edit routing-instances routing-instance-name protocols bgp group group-name],[edit routing-instances routing-instance-name protocols bgp group group-name neighbor address]

Release Information

Statement introduced before Junos OS Release 7.4.

Statement introduced in Junos OS Release 9.0 for EX Series switches.

Statement introduced in Junos OS Release 11.3 for the QFX Series.

Description

Configure the routing device so that active open messages are not sent to the peer. Once you configure the routing device to be passive, the routing device will wait for the peer to issue an open request before a message is sent.

Default

If you omit this statement, all explicitly configured peers are active, and each peer periodically sends open requests until its peer responds.

Required Privilege Level

routing—To view this statement in the configuration.

routing-control—To add this statement to the configuration.

 

Related Documentation

 

Published: 2014-07-23

Previous Page Next Page