Navigation
Supported Platforms
Related Documentation
pic-mode
Syntax
pic-mode mode;
Hierarchy Level
Release Information
Statement introduced in Junos OS Release 9.4 for EX Series switches.
Description
Configure the operating mode for the specified port on the SFP+ uplink module on an EX3200 or EX4200 switch.
On a switch using the SFP+ or SFP+ MACSec uplink module, the pic-mode setting defines the speeds of the SFP+ interfaces. When the PIC mode is set to 10g on the SFP+ or SFP+ MACSec uplink module, uplink ports 0 and 2 support MACSec at 10-Gbps speeds while ports 1 and 3 cannot be used to send any traffic. When the PIC mode is set to 1g, all four SFP+ ports on the uplink module support MACSec at 1-Gbps speeds.
Options
mode—Operating mode of the SFP+ uplink module:
- 1G—1-gigabit operating mode
- 10G—10-gigabit operating mode
Required Privilege Level
interface—To view this statement in the
configuration.
interface-control—To add this
statement to the configuration.
