Navigation
Related Documentation
- M, MX, PTX, T Series
- Single-Rate Two-Color Policer Overview
- Logical Interface (Aggregate) Policer Overview
- M, MX, T Series
- Bandwidth Policer Overview
policer (Applying to a Logical Interface)
Syntax
policer {input policer-name;output policer-name;}
Hierarchy Level
[edit interfaces interface-name unit unit-number],[edit interfaces interface-name unit unit-number family family],[edit logical-systems logical-system-name interfaces interface-name unit unit-number],[edit logical-systems logical-system-name interfaces interface-name unit unit-number family family]
Description
Apply a single-rate two-color policer—except for a physical interface policer—to Layer 3 input or output traffic at a logical interface.
- To rate-limit all traffic types, regardless of the protocol family, you can apply a logical interface policer at the logical unit level of a supported interface.
- To rate-limit traffic of a specific protocol family, you can apply a basic two-color policer, a bandwidth policer, or a logical interface policer at the protocol family level of a supported interface.
 | Note: You cannot apply a physical interface policer as part of the interface configuration. You can apply a physical interface policer by referencing the policer from a physical interface filter term. |
Options
input policer-name—Name of one policer to evaluate packets received on the interface.
output policer-name—Name of one policer to evaluate packets transmitted on the interface.
Required Privilege Level
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
Related Documentation
- M, MX, PTX, T Series
- Single-Rate Two-Color Policer Overview
- Logical Interface (Aggregate) Policer Overview
- M, MX, T Series
- Bandwidth Policer Overview
Published: 2013-08-28
Related Documentation
- M, MX, PTX, T Series
- Single-Rate Two-Color Policer Overview
- Logical Interface (Aggregate) Policer Overview
- M, MX, T Series
- Bandwidth Policer Overview
