Navigation
Related Documentation
- M, MX Series
- Configuring a Basic PPPoE Dynamic Profile
- Configuring a PPPoE Dynamic Profile with Additional Options
- For information about creating static PPPoE interfaces, see Configuring PPPoE
- MX Series
- Configuring Dynamic Authentication for PPP Subscribers
pp0 (Dynamic PPPoE)
Syntax
pp0 {unit logical-unit-number {keepalives interval seconds;no-keepalives;pppoe-options {underlying-interface interface-name;server;}ppp-options {authentication [ authentication-protocols ];chap {challenge-length minimum minimum-length maximum maximum-length;}pap;}family inet {unnumbered-address interface-name;address address;service {input {service-set service-set-name {service-filter filter-name;}post-service-filter filter-name;}output {service-set service-set-name {service-filter filter-name;}}}filter {input filter-name {precedence precedence;}output filter-name {precedence precedence;}}}}}
Hierarchy Level
[edit dynamic-profiles profile-name interfaces]
Release Information
Statement introduced in Junos OS Release 10.1.
Description
Configure the dynamic PPPoE logical interface in a dynamic profile. When the router creates a dynamic PPPoE logical interface on an underlying Ethernet interface configured with PPPoE (ppp-over-ether) encapsulation, it uses the information in the dynamic profile to determine the properties of the dynamic PPPoE logical interface.
The remaining statements are explained separately.
Required Privilege Level
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
Related Documentation
- M, MX Series
- Configuring a Basic PPPoE Dynamic Profile
- Configuring a PPPoE Dynamic Profile with Additional Options
- For information about creating static PPPoE interfaces, see Configuring PPPoE
- MX Series
- Configuring Dynamic Authentication for PPP Subscribers
Published: 2013-08-01
Related Documentation
- M, MX Series
- Configuring a Basic PPPoE Dynamic Profile
- Configuring a PPPoE Dynamic Profile with Additional Options
- For information about creating static PPPoE interfaces, see Configuring PPPoE
- MX Series
- Configuring Dynamic Authentication for PPP Subscribers