Related Documentation
- EX Series, QFX Series standalone switches
- Preprovisioning a Virtual Chassis Fabric
- Replacing a Member Switch of a Virtual Chassis Configuration (CLI Procedure)
- EX Series
- Example: Configuring an EX4200 Virtual Chassis Using a Preprovisioned Configuration File
- Example: Setting Up a Full Mesh EX8200 Virtual Chassis with Two EX8200 Switches and Redundant XRE200 External Routing Engines
- Configuring an EX4200, EX4500, or EX4550 Virtual Chassis (CLI Procedure)
- Configuring an EX8200 Virtual Chassis (CLI Procedure)
- Configuring an EX9200 Virtual Chassis
- QFX Series standalone switches
- Configuring a QFX Series Virtual Chassis (CLI Procedure)
preprovisioned
Syntax
Hierarchy Level
Release Information
Statement introduced in Junos OS Release 9.0 for EX Series switches.
Statement introduced in Junos OS Release 13.2X50-D15 for the QFX Series.
Statement introduced in Junos OS Release 13.2X51-D20 for Virtual Chassis Fabric (VCF).
Description
Enable the preprovisioned configuration mode for a Virtual Chassis or Virtual Chassis Fabric (VCF) configuration.
When the preprovisioned configuration mode is enabled, you cannot use the CLI or the J-Web interface to change the mastership priority or member ID of member switches.
You must use this statement to configure an EX8200 Virtual Chassis. Nonprovisioned configuration of an EX8200 Virtual Chassis is not supported.
Required Privilege Level
system—To view this statement in the configuration.
system-control—To add this statement to the configuration.
Related Documentation
- EX Series, QFX Series standalone switches
- Preprovisioning a Virtual Chassis Fabric
- Replacing a Member Switch of a Virtual Chassis Configuration (CLI Procedure)
- EX Series
- Example: Configuring an EX4200 Virtual Chassis Using a Preprovisioned Configuration File
- Example: Setting Up a Full Mesh EX8200 Virtual Chassis with Two EX8200 Switches and Redundant XRE200 External Routing Engines
- Configuring an EX4200, EX4500, or EX4550 Virtual Chassis (CLI Procedure)
- Configuring an EX8200 Virtual Chassis (CLI Procedure)
- Configuring an EX9200 Virtual Chassis
- QFX Series standalone switches
- Configuring a QFX Series Virtual Chassis (CLI Procedure)
Published: 2014-04-29
Related Documentation
- EX Series, QFX Series standalone switches
- Preprovisioning a Virtual Chassis Fabric
- Replacing a Member Switch of a Virtual Chassis Configuration (CLI Procedure)
- EX Series
- Example: Configuring an EX4200 Virtual Chassis Using a Preprovisioned Configuration File
- Example: Setting Up a Full Mesh EX8200 Virtual Chassis with Two EX8200 Switches and Redundant XRE200 External Routing Engines
- Configuring an EX4200, EX4500, or EX4550 Virtual Chassis (CLI Procedure)
- Configuring an EX8200 Virtual Chassis (CLI Procedure)
- Configuring an EX9200 Virtual Chassis
- QFX Series standalone switches
- Configuring a QFX Series Virtual Chassis (CLI Procedure)
