Supported Platforms
Related Documentation
- M, MX, PTX, T Series, QFX Series standalone switches
- Configuring BGP Monitoring Protocol Version 3
route-monitoring
Syntax
Hierarchy Level
Release Information
Statement introduced in Junos OS Release 13.2X51-D15 for the QFX Series.
Statement introduced in Junos OS Release 13.3.
Description
Specify whether BMP should send pre-policy route monitoring messages, post-policy route monitoring messages, both types of messages, or none at all. The pre-policy can be configured to exclude routes that are non-feasible for the decision process (for example, a route loop). The post-policy can be configured to exclude routes that are not eligible for the decision process (for example, protocol nexthop not resolved).
You can also selectively enable or disable BMP route monitoring at various hierarchy levels (for example, [edit protocols bgp group group-name] or [edit protocols bgp group group-name neighbor address]).
Options
none | — | Explicitly disables BMP route montioring. |
Default: If you configure the route-monitoring statement at the [edit routing-options bmp] hierarchy level, the default option is pre-policy.
If you configure the route-monitoring statement at any of the [edit protocols bgp] hierarchy levels, the default option is to inherit the configuration from the route-monitoring statement configured at the [edit routing-options bmp] hierarchy level.
The other statements are explained separately.
Required Privilege Level
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
Related Documentation
- M, MX, PTX, T Series, QFX Series standalone switches
- Configuring BGP Monitoring Protocol Version 3
Published: 2014-07-23
Supported Platforms
Related Documentation
- M, MX, PTX, T Series, QFX Series standalone switches
- Configuring BGP Monitoring Protocol Version 3
