Navigation
rule
Syntax
rule rule-name {match-direction (input | output);term term-name {from {application-sets set-name;applications [ application-names ];destination-address (address | any-unicast) <except>;destination-address-range low minimum-value high maximum-value <except>;source-address (address | any-unicast) <except>;source-address-range low minimum-value high maximum-value <except>;}then {no-translation;translated {address-pooling paired;destination-pool nat-pool-name; destination-prefix destination-prefix; destination-prefix;dns-alg-pool dns-alg-pool;dns-alg-prefix dns-alg-prefix;filtering-type endpoint-independent;mapping-type endpoint-independent;overload-pool overload-pool;overload-prefix overload-prefix;source-pool nat-pool-name;source-prefix source-prefix;translation-type (basic-nat-pt | basic-nat44 | basic-nat66 | dnat-44 | dynamic-nat44 | napt-44 | napt-66 | napt-pt | stateful-nat64 | twice-basic-nat-44 | twice-dynamic-nat-44 | twice-napt-44);}}syslog;}}}
Hierarchy Level
Release Information
Statement introduced before Junos OS Release 7.4.
Description
Specify the rule the router uses when applying this service.
 | Note: You are limited to a maximum of 200 terms for a NAT rule that is applied to an inline services (type si) interface. If you specify more than 200 terms, you will receive following error when you commit the configuration: [edit]
'service-set service-set-name'
NAT rule rule-name with more than 200 terms is disallowed for si-n/n/n.n
error: configuration check-out failed |
Options
rule-name—Identifier for the collection of terms that make up this rule.
The remaining statements are explained separately.
Required Privilege Level
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
