Navigation
Supported Platforms
Related Documentation
- QFabric System, QFX Series standalone switches
- Configuring sFlow Technology
- QFX Series standalone switches
- Example: Monitoring Network Traffic Using sFlow Technology
sample-rate
Syntax
sample-rate number;
Hierarchy Level
[edit protocols sflow],[edit protocols sflow interfaces interface-name]
Release Information
Statement introduced in Junos OS Release 11.3 for the QFX Series.
Description
Specify the denominator (number) of the ratio that is the sample rate in sFlow traffic monitoring. For example, to configure a sample rate of 1 in 1000 packets, you specify a number of 1000.
Default
If no sample rate is configured for a particular interface, the device uses the global sample rate configured at the [edit protocols sflow] hierarchy level. If no global rate is configured, the device uses the default sample rate of 1 in 2000 packets.
Options
number—Denominator of the ratio representing the sample rate (one packet out of number).
Range: 1 through 16,777,215
Required Privilege Level
routing—To view this statement in the
configuration.
routing-control—To add this statement
to the configuration.
Related Documentation
- QFabric System, QFX Series standalone switches
- Configuring sFlow Technology
- QFX Series standalone switches
- Example: Monitoring Network Traffic Using sFlow Technology
Published: 2014-07-23
Supported Platforms
Related Documentation
- QFabric System, QFX Series standalone switches
- Configuring sFlow Technology
- QFX Series standalone switches
- Example: Monitoring Network Traffic Using sFlow Technology
