Navigation
Supported Platforms
Related Documentation
- EX Series
- Configuring Gigabit Ethernet Interfaces (CLI Procedure)
- Configuring Gigabit Ethernet Interfaces (J-Web Procedure)
- Additional Information
- Junos OS Ethernet Interfaces Configuration Guide
speed
Syntax
speed (auto-negotiation | speed) ;
Hierarchy Level
[edit interfaces interface-name ether-options]
Release Information
Statement introduced in Junos OS Release 9.0 for EX Series switches.
Description
Configure the interface’s speed.
Default
If the auto-negotiation statement at the [edit interfaces interface-name ether-options] hierarchy level is enabled, the auto-negotiation option is enabled by default.
Options
- auto-negotiation—Automatically negotiate the speed based on the speed of the other end of the link. This option is available only when the auto-negotiation statement at the [edit interfaces interface-name ether-options] hierarchy level is enabled.
- speed—Specify the
interface speed. If the auto-negotiation statement at the [edit interfaces interface-name ether-options] hierarchy level is disabled, you must specify
a specific value. This value sets the speed that is used on the link.
If the auto-negotiation statement is enabled, you might
want to configure a specific speed value to advertise the desired
speed to the remote end.
- 10m—10 Mbps
- 100m—100 Mbps
- 1g—1 Gbps
Required Privilege Level
interface—To view this statement in the
configuration.
interface-control—To add this
statement to the configuration.
Related Documentation
- EX Series
- Configuring Gigabit Ethernet Interfaces (CLI Procedure)
- Configuring Gigabit Ethernet Interfaces (J-Web Procedure)
- Additional Information
- Junos OS Ethernet Interfaces Configuration Guide
Published: 2014-04-23
Supported Platforms
Related Documentation
- EX Series
- Configuring Gigabit Ethernet Interfaces (CLI Procedure)
- Configuring Gigabit Ethernet Interfaces (J-Web Procedure)
- Additional Information
- Junos OS Ethernet Interfaces Configuration Guide
