Supported Platforms
Related Documentation
- EX, M, MX, PTX, T Series, QFabric System, QFX Series standalone switches
- Example: Configuring the PIM SPT Threshold Policy
spt-threshold
Syntax
Hierarchy Level
Release Information
Statement introduced in Junos OS Release 8.0.
Statement introduced in Junos OS Release 9.0 for EX Series switches.
Statement introduced in Junos OS Release 11.3 for the QFX Series.
Description
Set the SPT threshold to infinity for a source-group address pair. Last-hop multicast routing devices running PIM sparse mode can forward the same stream of multicast packets onto the same LAN through an RPT rooted at the RP or an SPT rooted at the source. By default, last-hop routing devices transition to a direct SPT to the source. You can configure this routing device to set the SPT transition value to infinity to prevent this transition for any source-group address pair.
The remaining statements are explained separately.
Required Privilege Level
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
Related Documentation
- EX, M, MX, PTX, T Series, QFabric System, QFX Series standalone switches
- Example: Configuring the PIM SPT Threshold Policy
Published: 2014-07-23
Supported Platforms
Related Documentation
- EX, M, MX, PTX, T Series, QFabric System, QFX Series standalone switches
- Example: Configuring the PIM SPT Threshold Policy