Related Documentation
- Rate-Limiting for VoIP Traffic Overview and Configuring Rate Limiting for the BGF in Session Border Control Solutions Guide Using BGF and IMSG
sustained-data-rate (All Streams)
Syntax
Hierarchy Level
Release Information
Statement introduced in Junos OS Release 9.2.
maximum and minimum options introduced in Junos OS Release 9.5.
Description
Configure the sustained data rate for streams of any protocol, including RTP.
Default
The BGF uses the default value of 10,000 bytes per second if the Policy command in H.248 messages in ON and both of the following apply:
- The sustained data rate is not set in the H.248 message.
- There is no CLI configuration for sustained data rate.
Options
default bytes-per-second—Default value for sustained data rate.
Range: 125 through 4,294,967,295
maximum bytes-per-second—Maximum value for sustained data rate.
Range: 125 through 4,294,967,295
minimum bytes-per-second—Minimum value for sustained data rate.
Range: 125 through 4,294,967,295
rtcp-include—Include rtcp bandwidth in the sustained data rate.
Required Privilege Level
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
Related Documentation
- Rate-Limiting for VoIP Traffic Overview and Configuring Rate Limiting for the BGF in Session Border Control Solutions Guide Using BGF and IMSG
Published: 2013-07-19
Related Documentation
- Rate-Limiting for VoIP Traffic Overview and Configuring Rate Limiting for the BGF in Session Border Control Solutions Guide Using BGF and IMSG
