Navigation
Supported Platforms
Related Documentation
then (Rule)
Syntax
then {(accept | discard);count (application | application-group | application-group-any | rule);forwarding-class forwarding-class;police policer-name;}
Hierarchy Level
[edit services ptsp rule rule-name term precedence]
Release Information
Statement introduced in Junos OS Release 10.2.
Description
Define the term actions. You can configure the router to accept or discard the targeted traffic. The action modifiers (count and forwarding-class) are optional.
Options
You can configure one of the following actions:
- accept—Accept the packets and all subsequent packets in flows that match the rules.
- discard—Discard the packet and all subsequent packets in flows that match the rules.
When you select accept as the action, you can optionally configure one or both of the following action modifiers. No action modifiers are allowed with the discard action.
- count (application | application-group | application-group-any | rule | none)—For all accepted packets that match the
rules, record a packet count using PTSP statistics practices. You
can specify one of the following options; there is no default setting:
- application—Count the application that matched in the from clause.
- application-group—Count the application group that matched in the from clause.
- application-group-any—Count all application groups that match from application-group-any under the any group name.
- rule—Count the rule that matched in the from clause.
- none—Same as not specifying count as an action.
- forwarding-class forwarding-class—Specify the forwarding class name for outgoing packets.
When you include a policer, the only allowed action is discard. For more information on policers, see the Routing Policy Feature Guide for Routing Devices.
- police policer-name—Apply rate-limiting properties to the traffic as configured at the [edit firewall policer policer-name] hierarchy level. This configuration allows bit-rate and burst-size attributes to be applied to the traffic that are not supported by PTSP rules.
Required Privilege Level
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
