Supported Platforms
Related Documentation
- EX Series, QFabric System, QFX Series standalone switches
- show lldp
- EX Series
- Configuring LLDP (CLI Procedure)
- Understanding 802.1X and LLDP and LLDP-MED on EX Series Switches
transmit-delay
Syntax
Hierarchy Level
Release Information
Statement introduced in Junos OS Release 11.1 for EX Series switches.
Description
Specify the number of seconds the device delays before sending advertisements to neighbors after a change is made in a TLV (type, length, or value) element in the Link Layer Discovery Protocol (LLDP) or in the state of the local system, such as a change in hostname or management address. You can set this value to reduce the delay in notifying neighbors of a change in the local system.
The advertisement-interval value must be greater than or equal to four times the transmit-delay value, or an error will be returned when you attempt to commit the configuration.
Default
Enabled
Options
seconds—Delay after a change to the local TLVs or system state before LLDP advertisements are sent.
Range: 1 through 8192 seconds
Default:
- 2 seconds if the advertisement-interval value is set to 8 seconds or more
- 1 second if the advertisement-interval value is set to less than 8 seconds
Required Privilege Level
routing—To view this statement in the
configuration.
routing-control—To add this statement
to the configuration.
Related Documentation
- EX Series, QFabric System, QFX Series standalone switches
- show lldp
- EX Series
- Configuring LLDP (CLI Procedure)
- Understanding 802.1X and LLDP and LLDP-MED on EX Series Switches
Published: 2014-04-23
Supported Platforms
Related Documentation
- EX Series, QFabric System, QFX Series standalone switches
- show lldp
- EX Series
- Configuring LLDP (CLI Procedure)
- Understanding 802.1X and LLDP and LLDP-MED on EX Series Switches
