Rate and give feedback:
Feedback Received. Thank You!
EX2200 Switch Default Configuration
Each EX Series switch is programmed with a factory default configuration
that contains the values set for each configuration parameter when
a switch is shipped. The default configuration file for an EX2200
switch configures Ethernet switching and storm control on all interfaces,
configures Power over Ethernet (PoE) on all interfaces of models that
provide PoE, and enables the LLDP, LLDP-MED, and RSTP protocols and
IGMP snooping.
When you commit changes to the configuration, a new configuration
file is created that becomes the active configuration. You can always
revert to the factory default configuration—because an EX2200
switch does not have an LCD panel, use the CLI commands to revert
to the factory default configuration. See Reverting to the Default Factory Configuration for the EX Series Switch.
The following factory default configuration file is for an EX2200
switch with 24 ports, all of which have PoE capability:
 | Note:
The factory default configuration file is different for
different EX2200 switch models. The number of interfaces in the default configuration file depends
on the number of ports in the EX2200 switch. The poe stanza does not appear for models without PoE. Uplink ports for the EX2200 switches except the EX2200-C models
will be listed as ge-0/1/0 to ge-0/1/3 and for the
EX2200-C switches as ge-0/1/0 to ge-0/1/1. |
system {syslog {user * {any emergency;}file messages {any notice;authorization info;}file interactive-commands {interactive-commands any;}}commit {factory-settings {reset-chassis-lcd-menu;reset-virtual-chassis-configuration;}}}interfaces {ge-0/0/0 {unit 0 {family ethernet-switching;}}ge-0/0/1 {unit 0 {family ethernet-switching;}}ge-0/0/2 {unit 0 {family ethernet-switching;}}ge-0/0/3 {unit 0 {family ethernet-switching;}}ge-0/0/4 {unit 0 {family ethernet-switching;}}ge-0/0/5 {unit 0 {family ethernet-switching;}}ge-0/0/6 {unit 0 {family ethernet-switching;}}ge-0/0/7 {unit 0 {family ethernet-switching;}}ge-0/0/8 {unit 0 {family ethernet-switching;}}ge-0/0/9 {unit 0 {family ethernet-switching;}}ge-0/0/10 {unit 0 {family ethernet-switching;}}ge-0/0/11 {unit 0 {family ethernet-switching;}}ge-0/0/12 {unit 0 {family ethernet-switching;}}ge-0/0/13 {unit 0 {family ethernet-switching;}}ge-0/0/14 {unit 0 {family ethernet-switching;}}ge-0/0/15 {unit 0 {family ethernet-switching;}}ge-0/0/16 {unit 0 {family ethernet-switching;}}ge-0/0/17 {unit 0 {family ethernet-switching;}}ge-0/0/18 {unit 0 {family ethernet-switching;}}ge-0/0/19 {unit 0 {family ethernet-switching;}}ge-0/0/20 {unit 0 {family ethernet-switching;}}ge-0/0/21 {unit 0 {family ethernet-switching;}}ge-0/0/22 {unit 0 {family ethernet-switching;}}ge-0/0/23 {unit 0 {family ethernet-switching;}}ge-0/1/0 {unit 0 {family ethernet-switching;}}ge-0/1/1 {unit 0 {family ethernet-switching;}}ge-0/1/2 {unit 0 {family ethernet-switching;}}ge-0/1/3 {unit 0 {family ethernet-switching;}}}protocols {igmp-snooping {vlan all;}rstp;lldp {interface all;}lldp-med {interface all;}}ethernet-switching-options {storm-control {interface all;}}
Published: 2014-04-23
