Navigation
Supported Platforms
Related Documentation
- QFX Series standalone switches
- MPLS Feature Support on the QFX Series and EX4600 Switch Overview
Issues and Limitations in Operation of MPLS Features on the QFX Series and on EX4600
The following issues exist in the operation of MPLS features on QFX Series devices and on the EX4600 switch. In each case, the described behavior is the expected behavior.
- Configuring an MPLS firewall filter on a switch that is deployed as an egress provider edge (PE) switch has no effect.
- Configuring the revert-timer statement at the [edit protocols mpls] hierarchy level has no effect.
- If you configure the BGP labeled unicast address family (using the labeled-unicast statement at the [edit protocols bgp family inet] hierarchy level) on a QFX switch or an EX4600 switch deployed as a route reflector for BGP labeled routes, path selection will occur at the route reflector, and a single best path will be advertised. This will result in loss of BGP multipath information.
Related Documentation
- QFX Series standalone switches
- MPLS Feature Support on the QFX Series and EX4600 Switch Overview
Published: 2014-07-23
Supported Platforms
Related Documentation
- QFX Series standalone switches
- MPLS Feature Support on the QFX Series and EX4600 Switch Overview
