Navigation
Related Documentation
- EX, MX Series
- For information about physical links, see Configuring an Aggregated Ethernet Interface
- Additional Information
- Ethernet Interfaces
- For information about configuring aggregated devices, see the Junos OS Administration Library for Routing Devices.
Configuring the Number of Aggregated Ethernet Interfaces on the Device (Enhanced Layer 2 Software CLI Procedure)
By default, no aggregated Ethernet interfaces are created. You must set the number of aggregated Ethernet interfaces on the routing device before you can configure them.
On MX Series routers and EX9200 switches, you can configure a maximum of 480 aggregated interfaces. The aggregated interfaces(LAG bundles) are numbered from ae0 through ae479 on MX Series routers and EX9200 switches.
- Specify that you want to access the aggregated Ethernet
configuration on the device.user@host# edit chassis aggregated-devices ethernet
- Set the number of aggregated Ethernet interfaces.[edit chassis aggregated-devices ethernet]user@host# set device-count number
You must also specify the constituent physical links by including the 802.3ad statement at the [edit interfaces interface-name ether-options] or [edit interfaces interface-name ether-options] hierarchy level.
Related Documentation
- EX, MX Series
- For information about physical links, see Configuring an Aggregated Ethernet Interface
- Additional Information
- Ethernet Interfaces
- For information about configuring aggregated devices, see the Junos OS Administration Library for Routing Devices.
Published: 2013-11-21
Related Documentation
- EX, MX Series
- For information about physical links, see Configuring an Aggregated Ethernet Interface
- Additional Information
- Ethernet Interfaces
- For information about configuring aggregated devices, see the Junos OS Administration Library for Routing Devices.
