Navigation
Supported Platforms
Related Documentation
Configuring MX Series Router Cloud CPE NAT Services to Assign Primary IP Addresses
This topic describes how to configure NAT cCPE services to assign primary IP addresses to VPN subscribers.
Before you begin, make sure you have completed the steps for the cCPE common configuration. See Configuring the Common Configuration for MX Series Router Cloud CPE Services.
Then complete the following tasks to configure NAT cCPE services to assign primary IP addresses:
- Enable NAT on the PE router. See Configuring MX Series Router Cloud CPE NAT Services.
- Configure the service interfaces. See Configuring the Service Interfaces for MX Series Router Cloud CPE NAT Services.
- Configure the default route for the cCPE context. See Configuring the Static Route for MX Series Router Cloud CPE Services Context.
- Configure the public address pools. See Configuring Public Address Pools for MX Series Router Cloud CPE NAT Services.
- Configure the NAT rules. See Configuring NAT Rules for MX Series Router Cloud CPE NAT Services.
- Configure the logical interfaces. See Configuring the Inbound and Outbound Logical Interfaces for MX Series Router Cloud CPE NAT Services.
