Rate and give feedback:  Feedback Received. Thank You!

Rate and give feedback: 

X

This document helped resolve my issue

Yes No

Additional Comments

800 characters remaining

May we contact you if necessary?

Name:  

E-mail: 

Enter a valid Email ID

Need product assistance? Contact Juniper Support

Submit

This site is protected by hCaptcha and its Privacy Policy and Terms of Service apply.

English  

English

Configuring Customer VLAN (Level 3) Shaping on Enhanced Queuing DPCs

Customer VLAN (level 3) shaping on an MX Series 10-Gigabit Ethernet Enhanced Queuing DPC differs from the customer VLAN (level 3) shaping on an MX Series 1-Gigabit Ethernet Enhanced Queuing DPC. To use the customer VLAN (level 3) shaping on an MX Series 10-Gigabit Ethernet Enhanced Queuing DPC, configure an interface set at the [edit interfaces interface-set] hierarchy level. You do not need to configure the interface set while using customer VLAN (level 3) on an MX Series 1-Gigabit Ethernet Enhanced Queuing DPC.

1. Configure the interface set at the [edit interfaces] hierarchy level.
   [edit interfaces]user@host# set interface-set jnpr interface unit 100user@host# set interface-set jnpr interface xe-1/0/0 unit 101
2. Configure the hierarchical scheduler and enable VLAN tagging.
   [edit interfaces]user@host# set xe-1/0/0 hierarchical-scheduleruser@host# set xe-1/0/0 vlan-tagging
3. Configure the logical interface properties.
   [edit interfaces]user@host# set xe-1/0/0 unit 100 vlan-id 100 user@host# set xe-1/0/0 unit 100 family inet address 10.1.0.1/24 user@host# set xe-1/0/0 unit 101 vlan-id 101 user@host# set xe-1/0/0 unit 101 family inet address 10.1.1.1/24
4. Configure the traffic control profiles at the [edit class-of-service] hierarchy level.
   [edit class-of-service]user@host# set traffic-control-profiles profile1 shaping-rate 10g burst-size 2k user@host# set traffic-control-profiles profile1 guaranteed-rate 10g burst-size 2k user@host# set traffic-control-profiles profile2 shaping-rate 50m burst-size 2k user@host# set traffic-control-profiles profile2 guaranteed-rate 50m burst-size 2k user@host# set traffic-control-profiles profile3 shaping-rate 80m burst-size 3k user@host# set traffic-control-profiles profile3 guaranteed-rate 80m burst-size 3k
5. Configure the output traffic control profiles at the [edit class-of-service interfaces] hierarchy level.
   [edit class-of-service interfaces]user@host# set interface-set jnpr output-traffic-control-profiles profile1 user@host# set xe-1/0/0 unit 100 output-traffic-control-profiles profile2 user@host# set xe-1/0/0 unit 101 output-traffic-control-profiles profile3

1. Configure the interface set at the [edit interfaces] hierarchy level.
   [edit interfaces]user@host# set interface ge-1/0/0 unit 100user@host# set interface ge-1/0/0 unit 101
2. Configure the hierarchical scheduler and enable the VLAN tagging.
   [edit interfaces]user@host# set ge-1/0/0 hierarchical-scheduleruser@host# set ge-1/0/0 vlan-tagging
3. Configure the logical interface properties.
   [edit interfaces]user@host# set ge-1/0/0 unit 100 vlan-id 100 user@host# set ge-1/0/0 unit 100 family inet address 10.1.0.1/24 user@host# set ge-1/0/0 unit 101 vlan-id 101 user@host# set ge-1/0/0 unit 101 family inet address 10.1.1.1/24
4. Configure the traffic control profiles at the [edit class-of-service] hierarchy level.
   [edit class-of-service]user@host# set traffic-control-profiles profile1 shaping-rate 10g burst-size 2k user@host# set traffic-control-profiles profile1 guaranteed-rate 10g burst-size 2k user@host# set traffic-control-profiles profile2 shaping-rate 50m burst-size 2k user@host# set traffic-control-profiles profile2 guaranteed-rate 50m burst-size 2k user@host# set traffic-control-profiles profile3 shaping-rate 80m burst-size 3k user@host# set traffic-control-profiles profile3 guaranteed-rate 80m burst-size 3k
5. Configure the traffic control profiles at the [edit class-of-service interfaces] hierarchy level.
   [edit class-of-service interfaces]user@host# set ge-1/0/0 unit 100 output-traffic-control-profiles profile2 user@host# set ge-1/0/0 unit 101 output-traffic-control-profiles profile3