Navigation
Configuring the Routing Engine (Blade) Name
JCS configuration should include a name for each Routing Engine (blade) included with the JCS1200 platform. This name is used to identify each Routing Engine in CLI command output and so on.
To configure the blade name information:
- Log in to the JCS management module.
- Use the env command to specify the blade you
want to configure. For example:
system> env -T blade[1] - Use the config command to configure the blade
name. For example:
system:blade[1]> config -name BLADE01In this example, the blade name is BLADE01. This name identifies the JCS Routing Engine on the network, and it appears in monitoring command output.
