Navigation
Supported Platforms
Related Documentation
- ACX, J, M, MX, SRX, T Series
- Understanding IS-IS Designated Routers
- Example: Configuring IS-IS
Example: Configuring Designated Router Election Priority for IS-IS
This example shows how to configure the designated router election priority for IS-IS.
Before you begin:
- Configure network interfaces. See the Junos OS Interfaces Configuration Guide for Security Devices.
- Enable IS-IS on the interfaces. See Example: Configuring IS-IS.
In this example, you configure the priority for logical interface ge-0/0/1.0 to be 100 and the level number to be 1. If this interface has the highest priority value, the router becomes the designated router for the Level 1 area.
To configure a designated router election priority for IS-IS:
[edit]user@host# set protocols isis interface ge-0/0/1.0 level 1 priority 100
Related Documentation
- ACX, J, M, MX, SRX, T Series
- Understanding IS-IS Designated Routers
- Example: Configuring IS-IS
Published: 2014-07-23
Supported Platforms
Related Documentation
- ACX, J, M, MX, SRX, T Series
- Understanding IS-IS Designated Routers
- Example: Configuring IS-IS