Navigation
Supported Platforms
Related Documentation
- For general information about configuring an VLAN demux underlying interface, see the Junos OS Network Interfaces Library for Routing Devices.
Configuring Static Subscriber Interfaces Using VLAN Demux Interfaces
You can configure a subscriber interface using a statically created VLAN demux interface. This interface can be referenced in a dynamic profile.
To configure a static VLAN demux subscriber interface:
- Configure the VLAN demux interface.
- Configure the underlying interface on which the VLAN demux interface is running.
- Specify the underlying interface on which the VLAN demux interface is running.
- Specify how ingress IP traffic is to be demultiplexed based on the VLAN ID.
- Associate the static subscriber interface in a dynamic
profile.
See Associating Dynamic Profiles with Statically Created Interfaces.
 | Note: VLAN demux interfaces currently support the Internet Protocol version 4 (IPv4) suite (family inet) and the Internet Protocol version 6 (IPv6) suite (family inet6). VLAN demux subscriber interfaces over aggregated Ethernet physical interfaces are supported only for MX Series routers that have only MPCs installed. If the router has other cards in addition to MPCs, the CLI accepts the configuration but errors are reported when the subscriber interfaces are brought up. |
Related Documentation
- For general information about configuring an VLAN demux underlying interface, see the Junos OS Network Interfaces Library for Routing Devices.
Published: 2013-07-24
Supported Platforms
Related Documentation
- For general information about configuring an VLAN demux underlying interface, see the Junos OS Network Interfaces Library for Routing Devices.
