Navigation
Supported Platforms
Related Documentation
- QFabric System, QFX Series standalone switches
- Configuring Two-Color and Three-Color Policers to Control Traffic Rates
- Configuring Firewall Filters
- Monitoring Firewall Filter Traffic
Verifying That Two-Color Policers Are Operational
Purpose
Verify that two-color policers in firewall filter configurations are working properly.
Action
Use the show firewall policer operational mode command to verify that the policers are working properly:
user@switch> show firewall policerFilter: egress-vlan-watch-employee Filter: ingress-port-filter Filter: ingress-port-limit-tcp-icmp Policers: Name Packets icmp-connection-policer 10 tcp-connection-policer 539 Filter: ingress-vlan-rogue-block Filter: ingress-vlan-limit-guest
Meaning
The show firewall policer command displays the names of all firewall filters and policers that are configured. For each policer that is specified in a filter configuration, the output field shows the current packet count for all packets that exceed the specified rate limits.
Related Documentation
- QFabric System, QFX Series standalone switches
- Configuring Two-Color and Three-Color Policers to Control Traffic Rates
- Configuring Firewall Filters
- Monitoring Firewall Filter Traffic
Published: 2014-07-23
Supported Platforms
Related Documentation
- QFabric System, QFX Series standalone switches
- Configuring Two-Color and Three-Color Policers to Control Traffic Rates
- Configuring Firewall Filters
- Monitoring Firewall Filter Traffic
