Navigation
Supported Platforms
Related Documentation
Verifying the Setting for the Virtual Chassis Mode on EX4200, EX4500, and EX4550 Switches
Purpose
You must configure EX4200, EX4500, and EX4550 switches into mixed Virtual Chassis mode if you want those switches to act as member switches in a mixed EX4200 and EX4500 Virtual Chassis, mixed EX4200 and EX4550 Virtual Chassis, or mixed EX4200, EX4500, and EX4550 Virtual Chassis. You must also configure a switch out of mixed Virtual Chassis mode if you remove the switch from a mixed Virtual Chassis. You must change the Virtual Chassis mode for all member switches in a Virtual Chassis if the Virtual Chassis is changed to a non-mixed Virtual Chassis..
Action
To display the Virtual Chassis mode of any EX4200, EX4500, or EX4550 switch:
user@switch> show virtual-chassis modefpc0: -------------------------------------------------------------------------- Mixed Mode: Disabled
Meaning
The output indicates that the switch is currently not in mixed Virtual Chassis mode.
