Navigation
Configuring the E3 Frame Checksum
You can configure a 32-bit checksum, which provides more reliable packet verification. However, some older equipment might not support 32-bit checksums.
On a channelized OC12 interface, the fcs statement is not supported. To configure FCS on each E3 channel, you must include the e3-options fcs statement in the configuration for each channel.
To configure a 32-bit checksum, include the fcs statement at the [edit interfaces interface-name e3-options] hierarchy level:
[edit interfaces interface-name e3-options]fcs 32;
To return to the default 16-bit frame checksum, delete the fcs 32 statement from the configuration:
[edit]user@host# delete interfaces e3-fpc/pic/port e3-options fcs 32
To explicitly configure a 16-bit checksum, include the fcs statement at the [edit interfaces interface-name e3-options] hierarchy level:
[edit interfaces interface-name e3-options]fcs 16;
