Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

close
keyboard_arrow_left
list Table of Contents

Installing and Upgrading Firmware

date_range 18-Nov-24

To get optimal network performance and to fix a vulnerability, you can upgrade the firmware on your device.

Note:

For firmware upgrades on Junos OS Evolved, we recommend that you work with the Juniper Networks Technical Assistance Center (JTAC).

Before You Begin Installing or Upgrading the Firmware

Before you begin installing or upgrading the firmware on the MIC or PIC, complete the following steps:

  1. Verify that a previous version of the firmware package is installed on the router by using the show version command.

    show version (MX240, MX480, MX960, MX2010, MX2020)

    content_copy zoom_out_map
    user@host> show version
    Hostname: mxHost
    Model: mx480
    Junos: 15.1I20160816_2117_yyin
    JUNOS OS Kernel 64-bit (WITNESS) [20160723.102341_fbsd-builder_stable_10]
    JUNOS OS libs [20160723.102341_fbsd-builder_stable_10]
    JUNOS OS runtime [20160723.102341_fbsd-builder_stable_10]
    JUNOS OS time zone information [20160723.102341_fbsd-builder_stable_10]
    ...
    JUNOS jfirmware [20160628.005233_builder_release_151_f_throttle]
    JUNOS Online Documentation [20160812.205759_yyin_release_151_f_throttle]
    JUNOS FIPS mode utilities [20160816.211724_yyin_release_151_f_throttle]
    ....
    

    show version (PTX3000 and PTX5000)

    content_copy zoom_out_map
    user@host> show version
    Hostname: ptxHost
    Model: ptx3000
    Junos: 15.1F-20160720.0
    JUNOS Base OS boot [15.1F-20160720.0]
    JUNOS Base OS Software Suite [15.1F-20160720.0]
    JUNOS platform Software Suite [15.1F-20160720.0]
    JUNOS Web Management [15.1F-20160720.0]
    JUNOS Runtime Software Suite [15.1F-20160720.0]
    JUNOS Online Documentation [15.1F-20160720.0]
    ...
    JUNOS jfirmware [20160628.005233_builder_release_151_f_throttle]
    JUNOS 64-bit Runtime Software Suite [15.1F-20160720.0]
    JUNOS Packet Forwarding Engine Simulation Package [15.1F-20160720.0]
    JUNOS Packet Forwarding Engine Support (M/T/EX Common) [15.1F-20160720.0]
    JUNOS Packet Forwarding Engine Support (T-Series) [15.1F-20160720.0]
    JUNOS Routing Software Suite [15.1F-20160720.0]
    

    show version (ACX6360)

    content_copy zoom_out_map
    user@host> show version
    Hostname: YYY
    
    Model: ACX6360-OR
    Junos: 18.3I20180430_1917_XXX
    JUNOS OS Kernel 64-bit (WITNESS) [20180413.173511_fbsd-builder_stable_11]
    JUNOS OS libs [20180413.173511_fbsd-builder_stable_11]
    JUNOS OS runtime [20180413.173511_fbsd-builder_stable_11]
    JUNOS OS time zone information [20180413.173511_fbsd-builder_stable_11]
    ...
    JUNOS jfirmware [20180430.191738_XXX_dev_common]
    JUNOS Online Documentation [20180430.191738_XXX_dev_common]
    ...

    show version (SRX1600, SRX2300, SRX4300 and SRX4700)

    content_copy zoom_out_map
    user@host> show version 
    Hostname: YYY
    
    Model: srx1600
    Junos: 24.2I-20240219_dev_common.0.0827
    JUNOS OS Kernel 64-bit  [20240207.32ed862a0f7__ci_fbsd_builder_main]
    JUNOS modules [20240219.195852__cd-builder_dev_common]
    JUNOS srxtvp modules [20240219.195852__cd-builder_dev_common]
    JUNOS OS vmguest [20240207.32ed862a0f7__ci_fbsd_builder_main]
    JUNOS OS libs compat32 [20240207.32ed862a0f7__ci_fbsd_builder_main]
    JUNOS OS libs [20240207.32ed862a0f7__ci_fbsd_builder_main]
    JUNOS OS runtime [20240207.32ed862a0f7__ci_fbsd_builder_main]
    JUNOS OS 32-bit compatibility [20240207.32ed862a0f7__ci_fbsd_builder_main]
    JUNOS py base [20240219.195852__cd-builder_dev_common]
    JUNOS OS package [20240131.001731__ci_fbsd_builder_main]
    JUNOS network stack and utilities [20240219.195852__cd-builder_dev_common]
    JUNOS OS crypto [20240207.32ed862a0f7__ci_fbsd_builder_main]
    JUNOS OS boot-ve files [20240207.32ed862a0f7__ci_fbsd_builder_main]
    JUNOS libs [20240219.195852__cd-builder_dev_common]
    JUNOS srxtvp libs [20240219.195852__cd-builder_dev_common]
    JUNOS srx libs [20240219.195852__cd-builder_dev_common]
    JUNOS OS time zone information [20240207.32ed862a0f7__ci_fbsd_builder_main]
    JUNOS jail runtime [20240207.32ed862a0f7__ci_fbsd_builder_main]
    JUNOS py extensions [20240219.195852__cd-builder_dev_common]
    JUNOS vmguest  [20240219.195852__cd-builder_dev_common]
    JUNOS srx libs compat32 [20240219.195852__cd-builder_dev_common]
    JUNOS libs compat32 [20240219.195852__cd-builder_dev_common]
    JUNOS mtx network modules [20240219.171833__cd-builder_dev_common]
    JUNOS OS network modules [20240207.32ed862a0f7__ci_fbsd_builder_main]
    JUNOS daemons [20240219.195852__cd-builder_dev_common]
    JUNOS srx daemons [20240219.195852__cd-builder_dev_common]
    JUNOS srx runtime [20240219.195852__cd-builder_dev_common]
    JUNOS runtime [20240219.195852__cd-builder_dev_common]
    JUNOS dsa [20240219.195852__cd-builder_dev_common]
    JUNOS na telemetry [24.2I-20240219_dev_common.0.0827]
    JUNOS Web Management Platform Package [20240219.195852__cd-builder_dev_common]
    JUNOS lite sysmond [20240219.195852__cd-builder_dev_common]
    JUNOS publish subscribe base [20240219.195852__cd-builder_dev_common]
    JUNOS common platform support [20240219.195852__cd-builder_dev_common]
    JUNOS python routing scripts for consistency check in RIB/FIB/PFE [20240219.195852__cd-builder_dev_common]
    JUNOS Routing mpls-oam-basic [20240219.195852__cd-builder_dev_common]
    JUNOS Routing lsys [20240219.195852__cd-builder_dev_common]
    JUNOS Routing controller-external [20240219.195852__cd-builder_dev_common]
    JUNOS Routing 32-bit Compatible Version [20240219.195852__cd-builder_dev_common]
    JUNOS Routing aggregated [20240219.195852__cd-builder_dev_common]
    JUNOS probe utility [20240219.195852__cd-builder_dev_common]
    JUNOS pppoe [20240219.195852__cd-builder_dev_common]
    JUNOS Openconfig [24.2I-20240219_dev_common.0.0827]
    JUNOS L2 RSI Scripts [20240219.195852__cd-builder_dev_common]
    JUNOS Key Manager [20240219.195852__cd-builder_dev_common]
    JUNOS Phone-home [20240219.195852__cd-builder_dev_common]
    JUNOS Juniper Malware Removal Tool (JMRT) [1.0.0+20240219.171833__cd-builder_dev_common]
    JUNOS J-Insight [20240219.195852__cd-builder_dev_common]
    JUNOS jfirmware [20231123.175230_builder_junos_234_r1]
    JUNOS Online Documentation [20240219.195852__cd-builder_dev_common]
    JUNOS FIPS mode utilities [20240219.195852__cd-builder_dev_common]
    JUNOS Common BIOS [20240219.195852__cd-builder_dev_common]
    JUNOS Extension Toolkit [20240219.195852__cd-builder_dev_common]
    JUNOS Juniper Malware Removal Tool (JMRT) Test [1.0.0+20240219.171833__cd-builder_dev_common]
    JUNOS srx platform support [20240219.195852__cd-builder_dev_common]
    JUNOS SRX TVP AppQos Daemon [20240219.195852__cd-builder_dev_common]
    JUNOS srxtvp runtime [20240219.195852__cd-builder_dev_common]
    JUNOS srx Data Plane Crypto Support [20240219.195852__cd-builder_dev_common]
    JUNOS ike [20240219.195852__cd-builder_dev_common]

    If the output of the show version command displays JUNOS jfirmware.. among the list of packages that are installed on the router, then a previous version of the firmware package is installed on the router. If the output of the show version command does not display JUNOS jfirmware.. among the list of packages that are installed on the router, the firmware package is not installed on the router.

  2. If a previous version of the firmware package is installed on the router, delete the firmware package from the router by using the request system software delete command. If a previous version of the firmware package is not installed on the router, then proceed to install the firmware package. For information about how to install the firmware package, see Installing Firmware on the 100-Gigabit DWDM OTN MIC (MIC3-100G-DWDM) or Installing Firmware on the 5-Port 100-Gigabit DWDM OTN PIC (PTX-5-100G-WDM). For information about how to install the firmware package on ACX6360 router, see Installing Firmware on ACX6360 Router.
    content_copy zoom_out_map
    user@host> request system software delete jfirmware
    /packages/db/jfirmware-x86-32-15.1F-20160625.0
  3. To verify that the firmware package is removed from the router, use the show version command.
    content_copy zoom_out_map
    user@host> show version
    Hostname: mxHost
    Model: mx240
    Junos: 15.1F6-S1.3
    JUNOS OS Kernel 64-bit  [20160724.331042_builder_stable_10]
    JUNOS OS libs [20160724.331042_builder_stable_10]
    JUNOS OS runtime [20160724.331042_builder_stable_10]
    JUNOS OS time zone information [20160724.331042_builder_stable_10]
    ....
    JUNOS IDP Services [20160812.205945_builder_junos_151_f6_s1]
    ....
    JUNOS Packet Forwarding Engine Support (M/T Common) [20160812.205945_builder_junos_151_f6_s1]
    JUNOS Online Documentation [20160812.205945_builder_junos_151_f6_s1]
    JUNOS FIPS mode utilities [20160812.205945_builder_junos_151_f6_s1]

    show version (ACX6360)

    content_copy zoom_out_map
    user@host> show version
    Hostname: YYY
    
    Model: ACX6360-OR
    Junos: 18.3I20180430_1917_XXX
    JUNOS OS Kernel 64-bit (WITNESS) [20180413.173511_fbsd-builder_stable_11]
    JUNOS OS libs [20180413.173511_fbsd-builder_stable_11]
    JUNOS OS runtime [20180413.173511_fbsd-builder_stable_11]
    JUNOS OS time zone information [20180413.173511_fbsd-builder_stable_11]
    ...
    
    JUNOS IDP Services [20180430.191738_XXX_dev_common]
    ...
    JUNOS Online Documentation [20180430.191738_XXX_dev_common]
    ...

    If the firmware package is uninstalled successfully, the output of the show version command does not display JUNOS jfirmware.. among the list of packages that are installed on the router.

Installing Firmware on the 5-Port 100-Gigabit DWDM OTN PIC (PTX-5-100G-WDM)

Before you install the firmware package, ensure that a previous version is not installed on the router. For more information, see Before You Begin Installing or Upgrading the Firmware.

To install the firmware package, complete the following steps:

  1. Upgrade Junos OS on the router to the version that supports the firmware package. See Installing the Software Package on a Device with Redundant Routing Engines (Junos OS) or Installing the Software Package on a Router with a Single Routing Engine (Junos OS) for more information.
  2. Download the firmware package from https://support.juniper.net/support/downloads/. For information about downloading software packages, see Downloading Software (Junos OS).
    Note:

    Download the firmware package specific to your router. The firmware package for PTX Series routers is different from the firmware package for the MX Series routers.

  3. Save the firmware package to the /var/path/package-name directory on the router. For example, you can save the firmware package to the /var/tmp directory.
  4. Install the firmware package by using the request system software add path/package-name command. For example, to install the jfirmware-15.1F6.9.tgz package:
    content_copy zoom_out_map
    user@host> request system software add jfirmware-15.1F6.9.tgz
  5. Run the show version command to verify that the firmware package is installed.
    content_copy zoom_out_map
    user@host> show version

    After the firmware package is installed successfully, the output of the show version command displays Junos jfirmware.. among the list of packages that are installed on the router.

Upgrading Firmware on the 5-Port 100-Gigabit DWDM OTN PIC (PTX-5-100G-WDM)

Before you upgrade the firmware package, ensure that a previous version is not installed on the router. For more information, see Before You Begin Installing or Upgrading the Firmware.

To upgrade the version of your firmware, complete the following steps:

  1. Run the show system firmware command to view the list of components installed on the router and the firmware version for each component.
    content_copy zoom_out_map
    user@host> show system firmware
    Part       Type           Tag Current   Available Status
    			      version   version
    FPC 0       ROM Monitor 0  0   10.4.1              OK
    FPC 1       ROM Monitor 0  0   10.4.1              OK
    FPC 2       ROM Monitor 0  0   10.4.1              OK
      PIC 0     CMIC LTC 2/0   1   .0        1.0       OK
    FPC 3       ROM Monitor 0  0   10.4.1              OK
    FPC 4       ROM Monitor 0  0   13.3.1              OK
    FPC 4       MPCS(0)        2   0.24.0              OK
    Routing Engine 0 RE BIOS        0   1.18           OK
    Routing Engine 1                0   1.18           OK
    

    The output of the show system firmware command displays the current firmware version of the PIC as .0 and the available firmware version as 1.0.

  2. To upgrade the firmware of the PIC, use the request system firmware upgrade pic command. For example, to upgrade the firmware version of the PIC from .0 to 1.0, specify the FPC slot and PIC slot in the command.
    content_copy zoom_out_map
    user@host> request system firmware upgrade pic pic-slot 0 fpc-slot 2
    Part             Type           Tag Current   Available Status
    				    version   version
    FPC 2
      PIC 0          CMIC LTC 2/0   1   .0        1.0       OK
    Perform indicated firmware upgrade ? [yes,no] (no) yes

    Confirm that you want to perform the firmware upgrade by typing Yes so the firmware upgrade is initiated.

  3. To monitor the progress of the upgrade, use the show system firmware command. During the installation process, the status of the PIC changes to PROGRAMMING. When the installation process is complete, the status of the PIC changes to UPGRADED SUCCESSFULLY.
    Note:

    The amount of time it takes to upgrade firmware varies depending on the component.

    content_copy zoom_out_map
    user@host> show system firmware
    Part        Type           Tag Current   Available Status
    				version   version
    FPC 0            ROM Monitor 0  0   10.4.1              OK
    FPC 1            ROM Monitor 0  0   10.4.1              OK
    FPC 2            ROM Monitor 0  0   10.4.1              OK
      PIC 0          CMIC LTC 2/0   1   1.0        1.0      UPGRADED SUCCESSFULLY
    FPC 3            ROM Monitor 0  0   10.4.1              OK
    FPC 4            ROM Monitor 0  0   13.3.1              OK
    FPC 4            MPCS(0)        2   0.24.0              OK
    Routing Engine 0 RE BIOS        0   1.18                OK
    Routing Engine 1                0   1.18                OK
    Note:

    If the installation process fails, delete the firmware package by using the request system software delete firmware-package-name command. Reinstall the firmware package by following the procedure for installing the firmware package and then upgrade the firmware package.

  4. Restart the FPC that the PIC is installed in by using the request chassis fpc fpc-slot restart command.
  5. (Optional) After the firmware upgrade is successfully completed, uninstall the firmware package from the router by using the request system software delete command.

Installing Firmware on the 100-Gigabit DWDM OTN MIC (MIC3-100G-DWDM)

Before you install the firmware package, ensure that a previous version is not installed on the router. For more information, see Before You Begin Installing or Upgrading the Firmware.

To install the firmware package, complete the following steps:

  1. Upgrade Junos OS on the router to the version that supports the firmware package. See Installing the Software Package on a Device with Redundant Routing Engines (Junos OS) or Installing the Software Package on a Router with a Single Routing Engine (Junos OS) for more information.
  2. Download the firmware package from https://support.juniper.net/support/downloads/. For information about downloading software packages, see Downloading Software (Junos OS).
    Note:

    Download the firmware package specific to your router. The firmware package for MX Series routers is different from the firmware package for the PTX Series routers.

  3. Save the firmware package to the /var/path/package-name directory on the router. For example, you can save the firmware package to the /var/tmp directory.
  4. Install the firmware package by using the request system software add /var/path/package-name command. For example, to install the jfirmware-x86-32-15.1F6.9.tgz package:
    content_copy zoom_out_map
    user@host> request system software add jfirmware-x86-32-15.1F6.9.tgz
    
  5. Run the show version command to verify that the firmware package is installed.
    content_copy zoom_out_map
    user@host> show version
    Hostname: Host1
    Model: mx480
    Junos: 15.1I20160816_2117_yyin
    JUNOS OS Kernel 64-bit (WITNESS) [20160723.102341_fbsd-builder_stable_10]
    JUNOS OS libs [20160723.102341_fbsd-builder_stable_10]
    JUNOS OS runtime [20160723.102341_fbsd-builder_stable_10]
    JUNOS OS time zone information [20160723.102341_fbsd-builder_stable_10]
    ...
    JUNOS jfirmware [20160628.005233_builder_release_151_f_throttle]
    JUNOS Online Documentation [20160812.205759_yyin_release_151_f_throttle]
    JUNOS FIPS mode utilities [20160816.211724_yyin_release_151_f_throttle]
    ....

    After the firmware package is installed successfully, the output of the show version command displays JUNOS jfirmware.. among the list of packages that are installed on the router.

Upgrading Firmware on the 100-Gigabit DWDM OTN MIC (MIC3-100G-DWDM)

Before you upgrade the firmware package, ensure that a previous version is not installed on the router. For more information, see Before You Begin Installing or Upgrading the Firmware.

To upgrade the version of your firmware package, complete the following steps:

  1. Run the show system firmware command to view the list of components installed on the router and the firmware version for each component.
    content_copy zoom_out_map
    user@host> show system firmware
    Part       Type           Tag Current   Available Status
    			      version   version
    FPC 0            ROM Monitor 0  0   10.4.1              OK
    FPC 1            ROM Monitor 0  0   10.4.1              OK
    FPC 2            ROM Monitor 0  0   10.4.1              OK
      PIC 0          CMIC LTC 2/0   1   .0        1.0       OK
    FPC 3            ROM Monitor 0  0   10.4.1              OK
    FPC 4            ROM Monitor 0  0   13.3.1              OK
    FPC 4            MPCS(0)        2   0.24.0              OK
    Routing Engine 0 RE BIOS        0   1.18                OK
    Routing Engine 1                0   1.18                OK

    The output of the show system firmware command displays the current firmware version of the MIC as .0 and the available firmware version as 1.0.

  2. To upgrade the firmware of the MIC, use the request system firmware upgrade pic command. For example, to upgrade the firmware version of the MIC from .0 to 1.0, specify the MPC slot and MIC slot in the command.
    content_copy zoom_out_map
    user@host> request system firmware upgrade pic pic-slot 0 fpc-slot 2
    Part             Type           Tag Current   Available Status
    				    version   version
    FPC 2
      PIC 0          CMIC LTC 2/0   			1   .0        1.0       OK
    Perform indicated firmware upgrade ? [yes,no] (no) yes
    

    Confirm that you want to perform the firmware upgrade by typing Yes so the firmware upgrade is initiated.

  3. To monitor the progress of the upgrade, use the show system firmware command. During the installation process, the status of the MIC changes to PROGRAMMING. When the installation process is complete, the status of the MIC changes to UPGRADED SUCCESSFULLY.
    Note:

    The amount of time it takes to upgrade firmware varies depending on the component.

    content_copy zoom_out_map
    user@host> show system firmware
    Part       Type           Tag Current   Available Status
    			      version   version
    FPC 0            ROM Monitor 0  0   10.4.1              OK
    FPC 1            ROM Monitor 0  0   10.4.1              OK	
    FPC 2            ROM Monitor 0  0   10.4.1              OK
      PIC 0          CMIC LTC 2/0   1   .0        1.0       OK
    FPC 3            ROM Monitor 0  0   10.4.1              OK
    FPC 4            ROM Monitor 0  0   13.3.1              OK
    FPC 4            MPCS(0)        2   0.24.0              OK
    Routing Engine 0 RE BIOS        0   1.18                OK
    Routing Engine 1                0   1.18              	OK
    
    
    Note:

    If the installation process fails, delete the firmware package by using the request system software delete firmware-package-name command. Reinstall the firmware package by following the procedure for installing the firmware package and then upgrade the firmware package.

  4. Restart the MPC that the MIC is installed in by using the request chassis fpc fpc-slot restart command.
  5. (Optional) After the firmware upgrade is successfully completed, uninstall the firmware package from the router by using the request system software delete command.

Installing Firmware on ACX6360 Router

Before you install the firmware package, ensure that a previous version is not installed on the router. For more information, see Before You Begin Installing or Upgrading the Firmware.

To install the firmware package, complete the following steps:

  1. Upgrade Junos OS on the router to the version that supports the firmware package. See Installing the Software Package on a Device with Redundant Routing Engines (Junos OS) or Installing the Software Package on a Router with a Single Routing Engine (Junos OS) for more information.
  2. Download the firmware package from https://support.juniper.net/support/downloads/. For information about downloading software packages, see Downloading Software (Junos OS).
    Note:

    Download the firmware package specific to your router. The firmware package for ACX Series routers is different from the firmware package for the MX or PTX Series routers.

  3. Save the firmware package to the /var/path/package-name directory on the router. For example, you can save the firmware package to the /var/tmp directory.
  4. Install the firmware package by using the request system software add /var/path/package-name command. For example, to install the jfirmware-x86-32-15.1F6.9.tgz package:
    content_copy zoom_out_map
    user@host> request system software add jfirmware-x86-32-15.1F6.9.tgz
    
  5. Run the show version command to verify that the firmware package is installed.
    content_copy zoom_out_map
    user@host> show version
    Hostname: YYY
    
    Model: ACX6360-OR
    Junos: 18.3I20180430_1917_XXX
    JUNOS OS Kernel 64-bit (WITNESS) [20180413.173511_fbsd-builder_stable_11]
    JUNOS OS libs [20180413.173511_fbsd-builder_stable_11]
    JUNOS OS runtime [20180413.173511_fbsd-builder_stable_11]
    JUNOS OS time zone information [20180413.173511_fbsd-builder_stable_11]
    ...
    JUNOS jfirmware [20180430.191738_XXX_dev_common]
    JUNOS Online Documentation [20180430.191738_XXX_dev_common]
    JUNOS jail runtime [20180413.173511_fbsd-builder_stable_11]
    ....

    After the firmware package is installed successfully, the output of the show version command displays JUNOS jfirmware.. among the list of packages that are installed on the router.

Upgrading Firmware on the ACX6360 Router

Before you upgrade the firmware package, ensure that a previous version is not installed on the router. For more information, see Before You Begin Installing or Upgrading the Firmware.

To upgrade the version of your firmware package, complete the following steps:

  1. Run the show system firmware command to view the list of components installed on the router and the firmware version for each component.
    content_copy zoom_out_map
    user@host> show system firmware
    
    Part             Type              Tag Current   Available Status
                                           version   version
    Pseudo CB 0      CB FPGA           0   2.12.0    2.12.0    OK
    Pseudo CB 0      PORT FPGA         9   1.14.0    1.15.0    OK
    Pseudo CB 0      TIC FPGA          11  4101.5.0  4101.5.0  OK
    FPC 0                              0   0.0.0     71.63d    OK
    PIC 1            DWDM DCO-0/1/0    20  38.1.9    38.2.6    OK
    PIC 1            DWDM DCO-0/1/1    21  1.0.0     38.2.6    OK
    PIC 1            DWDM DCO-0/1/2    22  1.0.0     38.2.6    OK
    PIC 1            DWDM DCO-0/1/3    23  1.0.0     38.2.6    OK
    PIC 1            DWDM DCO-0/1/4    24  1.0.0     38.2.6    OK
    PIC 1            DWDM DCO-0/1/5    25  1.0.0     38.2.6    OK
    PIC 1            DWDM DCO-0/1/6    26  1.0.0     38.2.6    OK
    PIC 1            DWDM DCO-0/1/7    27  1.0.0     38.2.6    OK
    Routing Engine 0 RE BIOS           7   0.24.1    0.24.01   OK
    Routing Engine 0 RE FPGA           2   9.6.0     9.9.0     OK
    Routing Engine 0 RE SSD1           3   12028               OK
    Routing Engine 0 RE SSD2           4   12028               OK
    Power Supply 0                     0   0.0.0               OK
    Power Supply 1                     0   0.0.0               OK

    The output of the show system firmware command displays the current firmware version of the PIC as .0 and the available firmware version as 1.0.

  2. To upgrade the firmware of the PIC, for ACX6360 use the request system firmware upgrade pic command. For example, to upgrade the firmware version of the PIC from .0 to 1.0, specify the FPC slot and PIC slot in the command.
    content_copy zoom_out_map
    user@host> request system firmware upgrade pic fpc-slot 0 pic-slot 1
    
    Part             Type              Tag Current   Available Status
                                           version   version
    FPC 0
    PIC 1            DWDM DCO-0/1/0    20  38.2.9    38.2.6    OK
    Perform indicated firmware upgrade ? [yes,no] (no) yes

    Confirm that you want to perform the firmware upgrade by typing Yes so the firmware upgrade is initiated.

  3. To monitor the progress of the upgrade, use the show system firmware command. During the installation process, the status of the PIC changes to PROGRAMMING. When the installation process is complete, the status of the PIC changes to UPGRADED SUCCESSFULLY.
    Note:

    The amount of time it takes to upgrade firmware varies depending on the component.

    content_copy zoom_out_map
    user@host> show system firmware
    
    Part             Type              Tag Current   Available Status
                                           version   version
    Pseudo CB 0      CB FPGA           0   2.12.0    2.12.0    OK
    Pseudo CB 0      PORT FPGA         9   1.14.0    1.15.0    OK
    Pseudo CB 0      TIC FPGA          11  4101.5.0  4101.5.0  OK
    FPC 0                              0   0.0.0     71.63d    OK
    PIC 1            DWDM DCO-0/1/0    20  38.2.6    38.2.6    OK
    PIC 1            DWDM DCO-0/1/1    21  1.0.0     38.2.6    OK
    PIC 1            DWDM DCO-0/1/2    22  1.0.0     38.2.6    OK
    PIC 1            DWDM DCO-0/1/3    23  1.0.0     38.2.6    OK
    PIC 1            DWDM DCO-0/1/4    24  1.0.0     38.2.6    OK
    PIC 1            DWDM DCO-0/1/5    25  1.0.0     38.2.6    OK
    PIC 1            DWDM DCO-0/1/6    26  1.0.0     38.2.6    OK
    PIC 1            DWDM DCO-0/1/7    27  1.0.0     38.2.6    OK
    Routing Engine 0 RE BIOS           7   0.24.1    0.24.01   OK
    Routing Engine 0 RE FPGA           2   9.6.0     9.9.0     OK
    Routing Engine 0 RE SSD1           3   12028               OK
    Routing Engine 0 RE SSD2           4   12028               OK
    Power Supply 0                     0   0.0.0               OK
    Power Supply 1                     0   0.0.0               OK
    
    Note:

    If the installation process fails, delete the firmware package by using the request system software delete firmware-package-name command. Reinstall the firmware package by following the procedure for installing the firmware package and then upgrade the firmware package.

  4. Restart the ACX6360 router by using request chassis fpc restart slot 0 command for the upgrade to take effect.
  5. (Optional) After the firmware upgrade is successfully completed, uninstall the firmware package from the router by using the request system software delete command.
Back to Top
Ask AI
close

How can I help you today?

LLMs can make mistakes. Verify important information.
chat_add_on New topic
send progress_activity
This conversation will be monitored and recorded. Any information you provide will be subject to our Privacy Notice and may be used for quality assurance purposes. Do not include any personal or sensitive information. Ask AI can make mistakes. Verify generated output for accuracy.
Protected by hCaptcha arrow_drop_down arrow_drop_up
Juniper Networks, Inc. | Privacy Notice | Terms of Use